|
#1
|
||||
|
||||
Servo wire routing
Hi all, after fitting the steering servo I'm unsure of the best way to route the servo wire, if anyone could share a decent image of how you've done it that would be great
Nick Dex410 by the way Last edited by Nickwillyhams; 12-08-2014 at 06:42 PM. Reason: Specific model info |
#2
|
|||
|
|||
The side of the servo that it comes out is the servo saver side, i have it coming round the outside of the servo saver and then just up to ur receiver and the excess wire just bunched with other wire in large heat shrink
__________________
Team Durango - DNX8 - DEX8 - DEX410v5 - DEX210F - DEX210v3 - Novarossi - Beta - Futaba - Hudy - Orion |
#3
|
||||
|
||||
Heat shrink
Get some heat shrink from maplin or RS components. Work out minimum length of cable required, fold wire backwards and forwards over its self in a multiple z shape. I do this same width as servo. Slide over heat shrink hey presto! Looks neat and keeps excess wire neatly tucked away alongside servo.
|
#4
|
||||
|
||||
Here's how mine is routed. Just make sure that it doesn't rub on the servo saver.
__________________
Team Durango Australia www.team-durango.com Proline Australia A list of option parts and other information for Durango vehicles. www.durangofansite.com |
#5
|
||||
|
||||
Cheers lads. I might even put a little double sided tape on the plastics to help hold it away from the servo saver
|
#7
|
||||
|
||||
These things are certainly a 'tight fit'
|
|
|