|
#1
|
||||
|
||||
xx4
anyone got any good setups for the xx4
or what is bloomfield running on his???????????
__________________
CORNWALL Grass all the way simon mills http://www.oople.com/forums/image.ph...ine=1360240269 |
#2
|
||||
|
||||
This is what he said he was running at Broxtowe;
Toe. 1 out Ride height. 19mm Camber. -1degree Sway bar. N/A Oil. 30wt Piston. 55 Spring. Black Limiters. 2mm Shock location. 2. Middle Bump steer. Omm Camber link, 2 Rear Toe. Standard Ride height. 19mm Camber. -2 degree Rear hub spacing. Long Sway bar. N/A Oil. 25wt Piston. 54 Spring. Red Limiter. 0mm Camber link 7-e Shock location. 2-inside Wing. LMR/stage 3 This is as much info as he gave me, so cannot help out with any other details. Hope this helps a little though. |
#3
|
||||
|
||||
any help is great help
__________________
CORNWALL Grass all the way simon mills http://www.oople.com/forums/image.ph...ine=1360240269 |
#4
|
||||
|
||||
Oswestry grass
anyone got any ideas what the xx4 guys where running setup wise
__________________
CORNWALL Grass all the way simon mills http://www.oople.com/forums/image.ph...ine=1360240269 |
#5
|
||||
|
||||
I've asked Darren for set ups, but I think essentially he is still running as per your last set up request.
|
#6
|
||||
|
||||
hi
having probs with the rear diff, the middle keeps breaking away from the outside, happen to be twice now at 2 different meetings run the belt diff position on loose run only 8.5t motor can anyone help??? cheers simon
__________________
CORNWALL Grass all the way simon mills http://www.oople.com/forums/image.ph...ine=1360240269 |
#7
|
|||
|
|||
I had this once, not on the XX4 but on the XXX. The diff was slipping slightly. The diff balls got very hot and melted the plastic of the diff gear between the balls.
|
#8
|
||||
|
||||
ok will see if thats the prob when new bits arrive
__________________
CORNWALL Grass all the way simon mills http://www.oople.com/forums/image.ph...ine=1360240269 |
|
|