|
|
#2
|
||||
|
||||
Last edited by Arn0; 15-10-2009 at 09:55 PM. Reason: link renewed |
#3
|
||||
|
||||
Anyone got a setup for the WE for southport??....
Just bought one *feels faint!!!* |
#4
|
||||
|
||||
I cant tell you my setup (pretty much same as stu woods) since I dont have the car with me.. but the shocks are
front: blue spring #3 piston 30wt oil inside on tower outside on wishbone rear: green spring #1 piston 25wt oil inside on tower and wishbone I think 3 washers under the rear ball stud to lower it. Thats all I can remember! hehe.. the car was superb. |
#5
|
|||
|
|||
rear camberlink
3 washers under rear stud inside on hub short wheelbase front camberlink 3.5 washers outside 2 or 3 washers inside on the outer topdeck hole steering rack: forward hole 3 washers inside 1 outside i needed to use a 0.060 limiter inside the rear shocks and an o-ring outside allround to stop the driveshafts hitting the outdrives oneways can be used but that is down to personal choice |
#6
|
||||
|
||||
i tried all three drive types for the review. fixed, centre one way and front one way. they were progressively harder to drive and progressively faster on the track.
To my surprise the car was really good as it comes with full time 4wd |
#7
|
||||
|
||||
Quote:
|
#8
|
||||
|
||||
Quote:
is it me or the link? get the following in IE, Quote:
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
#9
|
||||
|
||||
not properly linked up yet but since you need it:
http://www.oople.com/rc/setup/jconcepts/SetupSheetsJConceptsBJ4.htm |
#10
|
||||
|
||||
Quote:
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
#11
|
||||
|
||||
Grip / Traction Roll
I'm currently running my BJ4 as below (other than 3 washers under the rear camber link which is now to 'B' on rear hub):
http://gallery.myff.org/gallery/80393/BJ4_May07.JPG I am suffering from severe grip roll. It means I have to drive over cautiously as I'm always worried it's going to flip. Has anyone got any ideas?
__________________
- Associated B6.1 - - Yokomo YZ CAL3.1 - - JConcepts BJ4WE - - Frankenstein DEX410 - - Schumacher Cougar Classic - - Xray T4 2013- - Tamiya Monster Beetle Black Edition - oOple Trader Feedback |
|
|