Dex 210 servo help wanted !!

[Team 36]

I just got durango 210 and brought savox servo 1251 digit coreless sevo what the best servo horn to use with it as I'm new to this I'm not sure what to buy so would like some advice thanks

[danDanEFC]

Their is a 25T servo horn in the box. I have tried other horns and they seem too long.

[CC44]

MB models

Kimbrough KP114 Servo-Saver Futaba 25 Spline

[Gregerl]

Actually the tlr22 alu servo horn is a really good fit, only need to epand the hole for the bolt holding the ball slightly.

I would not reccomend using the 1251 without a servo saver in the 210 though, manged to mess up two in ours within four packs of running without major shunts.

[steve73]

And Savox is not running with Tekin, because of the high current demand......

[Team 36]

Thanks for the advice guys will I need to buy space-saver & servo horn for my 1251 savox as going to order my bits tonight thanks again

[Tom_1984]

Have you bought a kit or an RTR. if its a kit you will have a 25T horn with it. If you give me a shout and I will post you a plastic one I have a few lol

[Jason A]

Hi you will find in the Team Durango 210 Kit that it is supplied with servo horns ranging from 23-25T with Savox being 25T

I have been running a Savox 1258 which is not a low profile servo but have only damaged one servo horn in 2 years of running my 210 car.

I would presume it depends how hard you hit things tho..

The new RTR kit comes with a servo saver so it might be worth ordering one of those if you feel the need.

[TonyM]

Originally Posted by steve73

And Savox is not running with Tekin, because of the high current demand......

I've been running Savox 1258's with Tekin RS Pro's in both 2WD and 4WD for almost four years now without a single problem. This is the first I've heard of anyone saying there is a problem with high current draw.

[steve73]

Originally Posted by TonyM

I've been running Savox 1258's with Tekin RS Pro's in both 2WD and 4WD for almost four years now without a single problem. This is the first I've heard of anyone saying there is a problem with high current draw.

Really??
Here in Germany a lot of people have this problem, i don't know why, but something in the construction from Savox must be very cheap
But everyone makes his own experience.....
For me Savox is dead - as always in life: If you buy cheap, you buy twice......

[Essexboyracer]

Originally Posted by CC44

MB models

Kimbrough KP114 Servo-Saver Futaba 25 Spline

Just got one of these, on this recommendation, and it fits real good.