|
#1
|
|||
|
|||
DEX210 Steering help
Fitted a New Savox 1258 servo and can't seem to achieve full lock either way, i've even have the EPA to 120% and still no joy. Is there a way to adjust the steering linkage?
|
#2
|
|||
|
|||
Could you post a picture of the setup? Make sure that the link between the servo and the steering rack is level and that there is no binding on the servo horn between the link and the horn itself. I have a 1258 in mine without any issues.
__________________
Schumacher KC, KD, CAT XLS, CAT L1 | Team C TM2 V2, TM4, TC02 | JQ The Car | Mugen MBX6 | Losi 8T,8BE 1.5 | Durango DEX-410V4 | FTX Blaze | XRAY M18T | Kyosho STR,Surf Dude,Nexus 30 | Nimrif Makara | MFA Spear | She Devil | T-Rex 450SEV2,250SE | Ark X-400 | Protech Butterfly,Zoom 400 | Ikarus Piccolo | VW T4 | Smart 450 | KC-250 | BoltRC Kraken 5" | Emax Nighthawk 250 | Gravity 250 | S550 | Prusa i3 | TronXY X5A | Must stop collecting stuff! |
#3
|
||||
|
||||
A longer servo arm should do the trick
|
#4
|
||||
|
||||
Quote:
Ditto i have got a 1251 in mine with standard servo horn and got too much steering!!! What servo horn are you using?
__________________
Iain Schumacher Laydown Schumacher Cat L1 Schumacher RC Octane |
#5
|
|||
|
|||
Stock servo horn;
|
#6
|
|||
|
|||
I raced at the weekend with a old prolux servo(stiff!) so i never really noticed if i achieved full lock but had EPA around 85% . Installed the new 1258 and noticed i wasn't getting to full lock but maybe i never was?
|
#7
|
|||
|
|||
Not trying to teach you to suck eggs but you have made sure that you are not using and dual rate or D/R? On my 3pk it is too easy to accidentally lower the dual rate and I have only recently worked out how to disable it.
__________________
Schumacher KC, KD, CAT XLS, CAT L1 | Team C TM2 V2, TM4, TC02 | JQ The Car | Mugen MBX6 | Losi 8T,8BE 1.5 | Durango DEX-410V4 | FTX Blaze | XRAY M18T | Kyosho STR,Surf Dude,Nexus 30 | Nimrif Makara | MFA Spear | She Devil | T-Rex 450SEV2,250SE | Ark X-400 | Protech Butterfly,Zoom 400 | Ikarus Piccolo | VW T4 | Smart 450 | KC-250 | BoltRC Kraken 5" | Emax Nighthawk 250 | Gravity 250 | S550 | Prusa i3 | TronXY X5A | Must stop collecting stuff! |
#8
|
|||
|
|||
AmiSMB,
You are right mate! Increasing my DR from 50% to 65% gave me full lock, i always thought that was just for increasing speed/sensitivity. I had the prolux at 100% because it's a SLOW servo but this 1258 is super fast so lowered it! |
#9
|
|||
|
|||
Glad I could help. Best put the DR at 100% and then adjust the EPA so that you get full lock both left and right without the servo making a lot of noise so it does not burn itself out and then you can use the DR if you find you need to get rid of some steering. If you find the new steering servo too fast then use the steering speed option if you have it. Good luck.
__________________
Schumacher KC, KD, CAT XLS, CAT L1 | Team C TM2 V2, TM4, TC02 | JQ The Car | Mugen MBX6 | Losi 8T,8BE 1.5 | Durango DEX-410V4 | FTX Blaze | XRAY M18T | Kyosho STR,Surf Dude,Nexus 30 | Nimrif Makara | MFA Spear | She Devil | T-Rex 450SEV2,250SE | Ark X-400 | Protech Butterfly,Zoom 400 | Ikarus Piccolo | VW T4 | Smart 450 | KC-250 | BoltRC Kraken 5" | Emax Nighthawk 250 | Gravity 250 | S550 | Prusa i3 | TronXY X5A | Must stop collecting stuff! |
|
|