|
#1
|
||||
|
||||
L1 Evo info thread
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#2
|
|||
|
|||
Observations and questions.
The belt setting guidance provided in the L1 EVO manual is helpful. Do those setting techniques also apply to the K1 and K2? The belts are wider on the L1 EVO than the original L1. Were the belts on the L1 skipping? It appears the original L1 metal upper transmission housings are an upgrade now and the center braces are stock. Will a one piece alloy transmission housing eventually be offered at some point (like the CAT 2000)? Do the U7412 alloy rear hub carriers use two 5x10x4 bearings or a 5x11x4 and 5x10x4? Is there a U7412v2? Will the alloy version of the gear diff housings use internal bearings like the rear diff housing of the Mi7? Last edited by Typpo; 18-12-2019 at 03:46 AM. |
#3
|
||||
|
||||
Quote:
Trish the designer talks about some of it in his videos https://www.youtube.com/channel/UCot...7Oey680GygVwhg
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#4
|
|||
|
|||
Evening!
No doubt something that many of us are thinking....... Is there going to be an upgrade kit made available for owners of the original L1? |
#5
|
|||
|
|||
[QUOTE=mark christopher; .... [/QUOTE]
Thank you for the detailed response and link. To clarify, the upper transmission parts I was referring to include the plastic parts (U7950, U7951) along with the alloy versions (U7342, U7343, U7348, U7349). For comparison, the CAT 2000 plastic (U1499) and alloy (U1867) equivalents were one piece units instead of separate alloy pieces for the left and right. Last edited by Typpo; 21-12-2019 at 02:33 AM. |
#6
|
||||
|
||||
Do the U7412 alloy rear hub carriers use two 5x10x4 bearings or a 5x11x4 and 5x10x4? Is there a U7412v2?
When checking my spare set of rear alloy hubs,I had to reckognize that there was a rolling change to 5x11x4 bearings after the last shortage of the hubs.. Cruise
__________________
Team CS-Electronic Team Schumacher |
#7
|
||||
|
||||
Quote:
no they will not be one piece, the parts are listed in the manual (page 54) and you need, U7338 - Dirt Covers - CAT L1 (3pcs)
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#8
|
|||
|
|||
When is the new evo available in the Stores?
|
#9
|
||||
|
||||
Quote:
chassis diff casing diff washers side guards radio trays hubs bearings belts gearbox tops body layshaft gear steering posts. plus more
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#10
|
||||
|
||||
now, shipped yesterday
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#11
|
|||
|
|||
Thank you for your help mark christopher and Cruise.
The Trishbits L1 EVO posting on youtube is also helpful. https://www.youtube.com/watch?v=8jWBjCFyALI Last edited by Typpo; 29-12-2019 at 12:22 AM. |
#12
|
|||
|
|||
Hi there, is there any updates as to the extra flex chassis, I see MO and JN seem to use it quite a lot. UK driver racing on astro
|
#13
|
|||
|
|||
Hi, anyone has heard of an update, usually it’s a 2 years cycle.
|
#14
|
||||
|
||||
New 4wd
Michal Orlowski testing new 4wd prototype in Florida November 2022
|
|
|