|
#1
|
|||
|
|||
Frsky conversion
Hi,
Just wondering if anybody knows some1 who has done a conversion on a sanwa super Exzes?? Or any link to show how it's done. I've seen the link for the ko propo but not 1 for the sanwa Thanks neil |
#2
|
||||
|
||||
Frsky
I have done a conversion on a super exzes you need to take the conections from the back of the module board then leave the module out in fact I removed the guts from the module and put the box back in the tranny to fill the space up. If I can find my drawing of the pins to use I will post later.
|
#3
|
|||
|
|||
On the FrSky conversion thread there are all the information you need .
http://www.oople.com/forums/showthre...=95271&page=12 Bye Ema |
#4
|
||||
|
||||
available from t9hobbysport
http://www.t9hobbysport.com/frsky-rc...mitter-modules from memory, sanwa module connector pin 1 is ppm signal, pin 2 is +ve, pin 4 is -ve. i think thats looking at module connector, working from left hand side. i've only done an M11 not an exzes.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#5
|
||||
|
||||
Quote:
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#6
|
|||
|
|||
Thanks
Thanks every 1 this info has bleeped me alot hopefully I will be able to do it just wondering what do to with module just take everything out of it so I can put that Frsky mod in it is that right??
|
#7
|
||||
|
||||
You will need to put the frsky unit inside the transmitter it wont fit in the modules box.
|
#8
|
|||
|
|||
Ok thanks a lot and all the other advice
|
|
|