Go Back   oOple.com Forums > Car Talk > Atomic Carbon

Reply
 
Thread Tools Display Modes
  #1  
Old 10-05-2010
Danny McGee's Avatar
Danny McGee Danny McGee is offline
Senior Member
 
Join Date: Mar 2006
Posts: 722
Default My Setup from RHR This weekend

2wd was as follows.
Front
Oil – 35
Piston – Red
Spring – Black
No Limiters, unscrewed 2 turns
DM Tower, inside hole
Outside on wishbone
2-B with 3 gold washers

Rear
Oil -27.5
Piston – Red
Spring – Pink (no Paint)
No limiters
Inside on tower
Old style rear end with 1degree hubs. So 4 deg in total
Extra hole drilled in wishbone on inside or inner hole.
Cut off the outside hole of the old style wishbones and use inner hole
A on 1deg hub
Short Wheel base
2 on the tower camber link

Weight
Rude Bits, T plate, Under battery plate, Battery Straps, under servo plate (thin) brass bulkhead

Tyres: Yellow SPIKES half hard foam in front and heard rear foam both losi

Motor Losi 7.5 geared 23/78

Speedo – Mamba with CHEAT set to 12,000 to 15,000.

Cheers

Danny
__________________
Schumacher - NOSRAM - TrishBits -
Reply With Quote
  #2  
Old 10-05-2010
Mossy Mossy is offline
Senior Member
 
Join Date: Feb 2007
Location: Stoke
Posts: 553
Send a message via MSN to Mossy
Default

Quote:
Originally Posted by Danny McGee View Post
2wd was as follows.

Tyres: Yellow SPIKES half hard foam in front and heard rear foam both losi
Told you every leg you had the wrong tyres on mate
__________________
Schumacher, Hobby Wing, Thunder Power, Anderson, Sanwa, Trishbits, P-Dub Racing, Rudebits, Inside Line, Nuclear RC, RC Domination, RPC
Reply With Quote
  #3  
Old 10-05-2010
Nick Nick is offline
Senior Member
 
Join Date: Aug 2009
Location: Skegness Lincolnshire
Posts: 398
Send a message via MSN to Nick Send a message via Skype™ to Nick
Default

Quote:
Originally Posted by Danny McGee View Post
2wd was as follows.
Front
Oil – 35
Piston – Red
Spring – Black
No Limiters, unscrewed 2 turns
DM Tower, inside hole
Outside on wishbone
2-B with 3 gold washers

Rear
Oil -27.5
Piston – Red
Spring – Pink (no Paint)
No limiters
Inside on tower
Old style rear end with 1degree hubs. So 4 deg in total
Extra hole drilled in wishbone on inside or inner hole.
Cut off the outside hole of the old style wishbones and use inner hole
A on 1deg hub
Short Wheel base
2 on the tower camber link

Weight
Rude Bits, T plate, Under battery plate, Battery Straps, under servo plate (thin) brass bulkhead

Tyres: Yellow SPIKES half hard foam in front and heard rear foam both losi

Motor Losi 7.5 geared 23/78

Speedo – Mamba with CHEAT set to 12,000 to 15,000.

Cheers

Danny
did you run the CR or old pivot block Danny? Ps gearbox cases should be done early next week
Reply With Quote
  #4  
Old 10-05-2010
Danny McGee's Avatar
Danny McGee Danny McGee is offline
Senior Member
 
Join Date: Mar 2006
Posts: 722
Default

Quote:
Originally Posted by Nick View Post
did you run the CR or old pivot block Danny? Ps gearbox cases should be done early next week
CR Pivot Block, Sorry forgot to mention that one .
__________________
Schumacher - NOSRAM - TrishBits -
Reply With Quote
  #5  
Old 10-05-2010
Danny McGee's Avatar
Danny McGee Danny McGee is offline
Senior Member
 
Join Date: Mar 2006
Posts: 722
Default

Quote:
Originally Posted by Mossy View Post
Told you every leg you had the wrong tyres on mate
I hope you run the WRONG tyres at EPR too
__________________
Schumacher - NOSRAM - TrishBits -
Reply With Quote
  #6  
Old 10-05-2010
Donutt Donutt is offline
Senior Member
 
Join Date: Mar 2009
Posts: 334
Default

Danny - how much timing were you running with the Mamba in CHEAT mode?
Reply With Quote
  #7  
Old 10-05-2010
V-Rossi's Avatar
V-Rossi V-Rossi is offline
Mad Member
 
Join Date: Jun 2007
Location: Antwerp, Belgium
Posts: 1,016
Default

Quote:
Originally Posted by Danny McGee View Post
CR Pivot Block, Sorry forgot to mention that one .
Did you have a go with the XXX rear end as well?

Congrats btw
__________________

Reply With Quote
  #8  
Old 10-05-2010
Danny McGee's Avatar
Danny McGee Danny McGee is offline
Senior Member
 
Join Date: Mar 2006
Posts: 722
Default

Quote:
Originally Posted by Donutt View Post
Danny - how much timing were you running with the Mamba in CHEAT mode?
It was 26 Degree's for the first 3 rounds and then i went onto 30 for the rest of the day. I will be sticking with 30 from now on i think. Going up didnt have any bad affects through the infield, it just went faster down the straight .

Danny
__________________
Schumacher - NOSRAM - TrishBits -
Reply With Quote
  #9  
Old 10-05-2010
Danny McGee's Avatar
Danny McGee Danny McGee is offline
Senior Member
 
Join Date: Mar 2006
Posts: 722
Default

Quote:
Originally Posted by V-Rossi View Post
Did you have a go with the XXX rear end as well?

Congrats btw
I didnt get a chance to no. It started off the day wet so we didnt really have much chance. I may give it a go at eden park but only if the track is dry.

My car was very good at Eden Park last time so i may not try it at all yet. I will give it a go before soon, just in case its amazing
__________________
Schumacher - NOSRAM - TrishBits -
Reply With Quote
  #10  
Old 10-05-2010
DaHomie DaHomie is offline
Member
 
Join Date: Jul 2006
Posts: 70
Default

Hi Danny, what is the DM Tower?
Reply With Quote
  #11  
Old 10-05-2010
DaHomie DaHomie is offline
Member
 
Join Date: Jul 2006
Posts: 70
Default

...And can you confirm if the 1-degree hubs you used was the LOSA9806 ones?
Reply With Quote
  #12  
Old 10-05-2010
Danny McGee's Avatar
Danny McGee Danny McGee is offline
Senior Member
 
Join Date: Mar 2006
Posts: 722
Default

Quote:
Originally Posted by DaHomie View Post
Hi Danny, what is the DM Tower?
Ah right sorry. Its my tower that Johnathon did for me. Its basically 2.5 and 3.5 on the tower that you have. Im not too sure if he sells the tower yet but im sure it wont harm in asking him

And yes LOSA9806 is the hubs that i used
__________________
Schumacher - NOSRAM - TrishBits -
Reply With Quote
  #13  
Old 10-05-2010
Freakypen Freakypen is offline
Senior Member
 
Join Date: Oct 2007
Posts: 323
Default

Well done Mr. Magee!!
__________________
PR-Racing UK
Insideline-Racing
Absima
Reply With Quote
  #14  
Old 10-05-2010
Rob_B Rob_B is offline
Senior Member
 
Join Date: Feb 2010
Posts: 414
Default

Any chance of your 4wd setup please danny?
Reply With Quote
  #15  
Old 11-05-2010
Danny McGee's Avatar
Danny McGee Danny McGee is offline
Senior Member
 
Join Date: Mar 2006
Posts: 722
Default

Quote:
Originally Posted by Rob_B View Post
Any chance of your 4wd setup please danny?
Honestly from the weekend, I didnt get a 4wd setup. I can let you knoe the setip that i will be using at Eden Park if thats any good? But i wouldnt want to lead people down the garden path with the one i had in the finals

Let me know and i can get it sorted

Danny
__________________
Schumacher - NOSRAM - TrishBits -
Reply With Quote
  #16  
Old 11-05-2010
Rob_B Rob_B is offline
Senior Member
 
Join Date: Feb 2010
Posts: 414
Default

Quote:
Originally Posted by Danny McGee View Post
Honestly from the weekend, I didnt get a 4wd setup. I can let you knoe the setip that i will be using at Eden Park if thats any good? But i wouldnt want to lead people down the garden path with the one i had in the finals

Let me know and i can get it sorted

Danny
Yes if you dont mind. Thanks
Reply With Quote
  #17  
Old 08-06-2010
mikeyscott's Avatar
mikeyscott mikeyscott is offline
Spends too long on oOple ...
 
Join Date: Mar 2009
Location: Hampshire
Posts: 7,223
Default

What's the ratio of the CR2 gear box?
Reply With Quote
  #18  
Old 15-06-2010
flipside flipside is offline
Mad Member
 
Join Date: Jul 2007
Posts: 1,047
Default

Quote:
Originally Posted by mikeyscott View Post
What's the ratio of the CR2 gear box?
Same as the CR, 2.43.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:58 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com