|
#1
|
|||
|
|||
pinion
What pinion would u recommend for a b44.2 with 6.5 motorthanx
|
#2
|
||||
|
||||
What size track?
|
#3
|
|||
|
|||
pinion
Medium size carpet
|
#4
|
||||
|
||||
Quote:
best to try what it says in manufacturer manual for recommended gear ratios and go from there....!!! Heres what Associated say....for the B44 (Manual) 19t pinion with 84t spur to get a Final Drive ratio of 11.05 for a 6.5t motor. or closest B44.1 using a 18t pinion with 81t spur to get a FDR 11.25 going by associated this is what you need but as said check with motor manual first for there recommended gearing
__________________
AKA Dexter Ex Club Chairman Visit our Face Book Page for address and to book in https://www.facebook.com/groups/289589121226171/ http://www.neamotorsport.co.uk/ |
#5
|
|||
|
|||
pinion
Thanx for the info motor is a speed passion v3 censored for now
|
#6
|
||||
|
||||
Quote:
running an 81t spur your looking at 20t, 21t and 22t pinion
__________________
AKA Dexter Ex Club Chairman Visit our Face Book Page for address and to book in https://www.facebook.com/groups/289589121226171/ http://www.neamotorsport.co.uk/ |
#7
|
||||
|
||||
Quote:
running an 81t spur your looking at 20t, 21t and 22t pinion keep an eye on temps though.....warm is ok but too hot is bad
__________________
AKA Dexter Ex Club Chairman Visit our Face Book Page for address and to book in https://www.facebook.com/groups/289589121226171/ http://www.neamotorsport.co.uk/ |
|
|