JM08 Stealth Chassis for TLR22

[cwp]

Originally Posted by jonathan may

how much weight under the lipo ?

I think it's about 80g.

[TonyM]

I tried to order one today but they are out of stock at RossMod. Any idea when they will be back in stock?

[jonathan may]

they had 17 in stock when i got mine and then 0 within a few hours so a hot seller

[Robocop]

Apart from the ftw shell what others fit?
Thanks

[jonathan may]

what wheelbase are you using with the stealth chassis

[cwp]

Originally Posted by Robocop

Apart from the ftw shell what others fit?
Thanks

If you run the saddles as standard you can use the standard shell.
If you run with the saddles across the chassis the shell needs to have high side pods.
At this moment in time we have only fitted the FTW so I can’t comment at this moment in time.
But I recon the Phat body will fit once its made.

[mrspeedy]

Just to confirm the Phat Bodies shell will fit even with lipos across the chassis

[cwp]

Originally Posted by jonathan may

what wheelbase are you using with the stealth chassis

We run the front whishbones forward And hubs forward
And we run the rear wishbone back and the hubs forward

[jonathan may]

Originally Posted by cwp

We run the front whishbones forward And hubs forward
And we run the rear wishbone back and the hubs forward

do you modify the front whishbones to run them forward

[cwp]

Originally Posted by jonathan may

do you modify the front whishbones to run them forward

Yes we filed 1mm of the front.
it's not a lot.

[DCM]

Well, gave mine a buzz this afternoon, and I am unsure whether it was the total strip down, diff rebuild, cut out the bladders in the shocks or the chassis that made it a lot better.

[jonathan may]

will have to wait a week to try mine

[Robocop]

Anyone else had a go with there stealth chassis over the weekend,thoughts pros and cons etc.
Thanks

[madap1]

anyone know when these will be back in stock?

[jonathan may]

so do you recomend using the LRC blocks with the stealth chassis

[cwp]

Originally Posted by madap1

anyone know when these will be back in stock?

They will be back in stock soon.

[cwp]

Originally Posted by jonathan may

so do you recomend using the LRC blocks with the stealth chassis

Try both we just went with the lrc.

[DCM]

Well, the car felt a lot better to drive, still not being able to nail the throttle out of tight corners, but the problem is far less and need a little more steering please!

[jonathan may]

raced mine today and also need more steering.

[andys]

Originally Posted by DCM

Well, the car felt a lot better to drive, still not being able to nail the throttle out of tight corners, but the problem is far less and need a little more steering please!

Hi. I know you have had issues with your 22, as have I.
Out of interest which speedo and which motor (and turn) are you running ?

I had a speed passion 6.5 in mine and it never liked the beans out of corners, gone to a 7.5 with a few mods ( cream weight, 110g brass under short lipo, soft rear suspension - White spring etc) and it's a doodle to get around now. Not quite as fast as I'd like, but I'm still playing with gearing and speedo settings.