|
||
|
 |
|
||||||||||||||||||
|
#1
27-10-2015
|
||||
|
||||
Hobbywing Xerun 60A ESC (No Throttle)
Hi,
I have a Hobbywing Xerun 60A in my Tamiya mini. After programming it on the programming box, the car has no throttle, but the steering works perfectly. I've tried a different receiver/transmitter with the ESC and the throttle still doesn't work. It's running a Brushless Ezrun 13t sensor less motor. All help appreciated! 
|
|
#4
27-10-2015
|
||||
|
||||
also occosionally you need to "reverse" the direction of throttle channel to make it work (futaba i think suffers this )
to calibrate HW hold down little red button on "on/off switch" or button on ESC and switch on wait till hear a single "beep" for neutral position press button agai to hear "double beep" then hit full throttle on tx (motor is disarmed during this) lastly you should hear a "treble beep" then hit full brake return trigger or stick to neutral and you should be calibrated occasonally you may have to switch ESC off and on again make sure tx end points are at 100% and trims neutral before you start HTH dave please PM if still stuck ill talk you through it
|
|
#5
27-10-2015
|
|||
|
|||
|
There should be a little red button somewhere, either on the on/off switch or on the esc its self, once u have found it reset all your transmitter (epa, trim) or what ever u have changed back to the standard setting
Hold the red button down and switch the esc on (already have ur transmitter on) it should start beeping, the first option i think it neutral dont touch the transmitter an press the red button once (should beep once) and let go. next i think is throttle so give it full throttle on the transmitter and press the red button (should beep twice) let go, last is brake so hold full brake and press the red button. Switch everything off an on, if u still.have no throttle dp the same again but do neutral, brake then throttle last as cant be sure of the right order
|
 |
|
|
Linear Mode
