|
||
|
 |
|
||||||||||||||||||
|
#1
27-12-2010
|
||||
|
||||
B4 Motor screws
Hi guys
I'm putting a B4 Ft together that I picked up off here. Didn't come with any screws to mount the motor. Can anyone tell me what screws I need? The manual lists them as 3mm, which I assume is the width, but no note on how long they should be. Any B4 guru's know? Ta folks 
|
|
#2
27-12-2010
|
||||
|
||||
|
What you need are M3 screws with a hex head in about 8-10mm length.
Any model shop ought to be able to sell you some. Make sure you use washers as well or they will chew up the motor plate.
__________________
|
|
#3
27-12-2010
|
||||
|
||||
|
|
|
#4
27-12-2010
|
||||
|
||||
|
Those are button head screws. They will work although I prefer cap head screws as the hex is bigger and deeper.
These should do nicely: http://cgi.ebay.co.uk/M3-x-8-Socket-...item2a0af608a8
__________________
|
|
#5
27-12-2010
|
||||
|
||||
|
Thankyou kindly
|
 |
|
|
Team Associated
Linear Mode
