|
#1
|
|||
|
|||
Servo arm
Recently bought a secondhand yokomo bmax-2,it came with no servo arm,do people run them with a servo saver Set up or just direct is there any other brand that fit if I put it direct any help gratefully accepted cheers
|
#2
|
||||
|
||||
i had issues with my first kit servo saver working loose all the time, but the second kit ive just built is fine.
alternatives that work: the hudy one is same lenth as kit, and has a decent stand-off so works well. the alloy losi 22 works if you have a decent full sized servo. the throw is not enough for a savox low profile, as it lenght is shorter than kit. fine with an xpert rc low profile. the yokomo touring car one is too long to fit. I'll add some links to parts later. just out now and on my phone.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#3
|
|||
|
|||
Cheers mate that would be great
|
#4
|
||||
|
||||
Hudy part: #DY293493 - ALU SERVO HORN - FUTABA & SAVOX - OFFSET - 25T - V2
http://www.rccarshop.co.uk/index.php...et-25t-v2.html Losi Part: #TLR1557 - Aluminium 25t Servo Horn http://www.rccarshop.co.uk/index.php...ervo-horn.html (Note1: also #TLR1555 and #TLR1556 for 23/24 tooth splines) (Note2: needs a longer throw servo. Does not work with a savox low profile as not enough throw) (Note3: I needed to tap an M3 thread in the ball hole as it seemed to have an imperial thread?) Yokomo Kit Parts: http://www.rccarshop.co.uk/index.php...ell-crank.html http://www.rccarshop.co.uk/index.php...tal-parts.html Both are needed for kit servo saver.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- Last edited by neallewis; 08-09-2014 at 05:01 PM. |
#5
|
|||
|
|||
I knew these would be released as soon as I put my Max on the shelf...
Arrowmax servo arms, now available e.g. at Tonisport: |
#6
|
||||
|
||||
Ah that looks good. Any idea what the hole centre to hole centre measurement is?
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#7
|
|||
|
|||
Would these would with a xpert low profile servo
__________________
Agama Hobbywing Sanwa |
|
|