|
#1
|
||||
|
||||
My home made battery tray and front hinge
I made thoose pieces for a test :
Battery tray (simple plastic 2,5mm) : Front hinge pin brace (epoxy 2,5mm) :
__________________
Tamiya F103 - Hobbywing 13.5 - Hobbywing 1S Tamiya TRF201 - PRT HS 10.5 - Tekin RS Pro http://rctouch.over-blog.com/ |
#2
|
||||
|
||||
All good, but the fan on the speedo is not going to be doing anything for colling positioned there.
The fan needs to blow air across the fins if you cant place it on top. Move the fan in front of the speedo so that it will blow the air across the fins, even if the cables are in the way, some air movement is better than none. Hope this helps. Col.
__________________
TRF 501x - Tamiyafied Madrat - Bograt Rc10 FT T4 RC18T Lunchbox Gold X-6 squared Lrp, Novak, Robitronic, Ko Propo, Ezrun , Trakpower ,Team Scream, Demon, Microtech, Dms, Good old Jezza, Je-Spares, Bolton Model Mart, My Feedback http://www.oople.com/forums/showthread.php?t=25199 |
#3
|
||||
|
||||
Thx for the tips Colinevan, I'll do it
__________________
Tamiya F103 - Hobbywing 13.5 - Hobbywing 1S Tamiya TRF201 - PRT HS 10.5 - Tekin RS Pro http://rctouch.over-blog.com/ |
#4
|
||||
|
||||
Nice
__________________
Rob Martin _____________________ Sponsers Viper~~B-FAST~PGXGraphics~Nankinhobby~Trick-Parts~Speedzone Batteries. |
#5
|
||||
|
||||
Better still mount the whole esc on its side with the fan correctly positioned over the fins!
Or ditch the fan completely like I have (at your own risk of course!!) |
#6
|
||||
|
||||
nope leave the ESC as it is and put the fan in front of it
__________________
DO NOT BUY/SELL TO THIS USER. |
#7
|
||||
|
||||
Well, in this position, with my 8.5T motor, absolutly no heat from the ESC, so...
If I change something, I'll put the fan in front of the esc
__________________
Tamiya F103 - Hobbywing 13.5 - Hobbywing 1S Tamiya TRF201 - PRT HS 10.5 - Tekin RS Pro http://rctouch.over-blog.com/ |
|
|