|
#1
|
||||
|
||||
schumacher hex diff washers
were the hex diff washers fitted to procat diffs made only to fit the procat(mms?) diff or were they common to other models?.
|
#2
|
||||
|
||||
They came (Schumacher ones) after the procat was launched, but I think they were gone by the time the bosscat came. I suspect they would have been used in ( or at least would fit) the cougar. I think the cougar 2 had moved onto the same design as Bosscat.
Not sure if they were used in any other models.
__________________
Matthew White |
#3
|
||||
|
||||
the bosscat and cougar2 used the tri-lobe washers which schumacher still list. i`m looking to find some of the hex drive washers and seem to remember that they were fitted to something else ?.
|
#4
|
||||
|
||||
|
#5
|
||||
|
||||
jeroen thanks for the reply,have just bought them.
|
#6
|
||||
|
||||
Hi Brian, I found out from Dangermouse on RC10Talk that the Losi hex washers LOSA3010 fit and are more hardwearing too.
|
#7
|
||||
|
||||
hi kazal, thanks for the part number have just found some of them on ebay, will see if they fit when they arrive and let you know.cheers
|
#8
|
||||
|
||||
Hi Brian, I got mine already - they fit the Schumacher alloy diff halves well (maybe a tiny bit looser) and are about 0.18mm thicker.
|
|
|