Doing somewhat of a restoration project on a toy car made by Nikko. The main circuit board is dead, but as far as I know, the steering servo works. Want to replace all the electrics with modern style RX and ESC.
The servo has 6 wires coming from it, and I want to put it into a standard servo plug for a modern receiver. Below are some pictures of it next to a modern day servo. i want to use the original servo because i'd have to modify the other servo to fit properly. I can get a photo of the circuit board if you want, but i doubt it would be very helpful. The colours coming from the servo are
orange, blue, black, white, yellow and green.
thanks for any help!
13-05-2007
6 servo wires
Linear Mode
