|
#1
|
|||
|
|||
RC10 FT V2 World’s Car shocks
Would like a set of 1.32 and .71 threaded body shocks to complete the rebuild on my old Team car. It’s intended to be run hence I would really like to use some decent “factory” parts.
|
#2
|
||||
|
||||
I know it’s not exactly what you’re looking for but I thought I’d offer none the less . I have a set of New built b3 team shocks I’m going to sell , they are perfect as expected from new shocks . They aren’t threaded bodies but I do have all of the ride height adjuster shims that came new in the kit .
__________________
|
#3
|
|||
|
|||
Hi, not sure. The B3 Team shocks should be threaded but any B3 rear shocks should be 1.32 inch rear bodies (I think) assuming I’m reading the manual correctly. But the fronts are .89 inch and I need .71s. I already have some .89 fronts and they’re just too long. So I’d only actually be interested in the rears (assuming they are indeed 1.32) which is probably no use to you as you’ll sell a full set easier than just two fronts.
|
#4
|
||||
|
||||
I’m unsure on the sizong of the shock bodies themselves but all b3 shocks had shim adjusters whether it be sport models or team and factory team kits and definitely weren’t threaded bodies . It was on the b4 and the rc10 worlds re re they went to threaded bodies .
__________________
|
#5
|
|||
|
|||
Apologies, I was indeed misreading the manual lol. You’re absolutely right.
|
#6
|
||||
|
||||
If you must have threaded body Associated shocks try looking for b4 shocks but again I’m not sure what size the bodies are
__________________
|
|
|