I've got another set of motor side plates the same as what's on my Procat for sale. I have managed to find some old mms bits abroad so need to free up a bit of cash.
These were made by SOS-MMRC and are very good quality as you can see from the pics. The holes for the cam adjusters and the bearing housings have been tapped to take a m2 so you can get rid of the self tappers and fit some hex bolts.
These are thicker than the kit one which you can see from the pics are 1.6mm thick and these are 3mm so are stronger and with the heat sink cut in will help distribute the heat better. You will need to fit wider bearings or shim the originals on the layshaft to account for the extra depth in the plates.
The only thing I did miss was I told Tim to counter sink all the holes but forgot the two at the bottom for the wishbone bracket didn't need to be but I've just added a washer to make up for it.
These will fit the Procat, Bosscat and xls
As for price I would like £60 but I am open to offers
20-04-2014
Custom Procat motor plates
Linear Mode
