|
#1
|
||||
|
||||
b44.1 with big bore springs?
seen a few of these mods around to fit big bore springs on the standard small bore 44 shocks any one tried and tested it yet to offer there opinions on i its worth doing?
__________________
team durango, xray t3 12, tekin, lrp, ko propo, tamiya m03 |
#2
|
||||
|
||||
Big bore springs
Hi, I use Kyosho big bore springs on my Tamiya 502 and I really like them.
More progressive giving a better feel on most tracks. Although at £12 a pair they're not cheap. All I have ever used is yellow fronts with red rears or red fronts with white rears. Hope this helps. Dave
__________________
Team Associated Hobbywing SRT Reedy My feedback http://www.oople.com/forums/showthread.php?t=63097 |
#3
|
|||
|
|||
yes, I use kyosho yellow front and white rear on my B44.1 and woks verry good
|
#4
|
||||
|
||||
Front - Losi Blue/Black
Rear - Losi White/Yellow Losi red piston front and blue rear. |
#5
|
||||
|
||||
I run with the AVID Springs, they work great for me.
Front: 35wt/Ghea Magic Piston 2/AVID purple Rear: 30wt/Ghea Magic Piston 1/AVID yellow The stock pistons also worked properly. |
#6
|
|||
|
|||
I run them and they make the car so easy to drive and more predictable!
Won north west regional today with the below setup. Remove 3 outer rows off front an one inner Remove 1 inner and 1 outer off rear Bed in prior to running aswell on some Tarmac http://www.petitrc.com/setup/associa...701/index.html
__________________
Gareth Hill Schumacher - Sanwa - LRP - Mb models |
#7
|
||||
|
||||
ill give it a try
thanks for all the replys very helpfull, looks like ill have to give that a try
__________________
team durango, xray t3 12, tekin, lrp, ko propo, tamiya m03 |
#8
|
||||
|
||||
where to buy
Quote:
wheres the best palce to buy them from an what about the lower spring seats do u use losi ones?
__________________
team durango, xray t3 12, tekin, lrp, ko propo, tamiya m03 |
#9
|
|||
|
|||
Quote:
And losi springs from mb models and JE spares Pdub racing do the ghea collars
__________________
Gareth Hill Schumacher - Sanwa - LRP - Mb models |
#10
|
|||
|
|||
*
Anyone run durango big bores and if so what seats etc do you need to buy
Jamie |
#11
|
||||
|
||||
Quote:
For the spring collars I've used the Ghea items: (http://p-dubracing.co.uk/index.php?m...products_id=23) AVID are also making spring collars for the AE shocks: (http://www.avidrc.com/product/5/acce...ccesories.html) For the spring cup, you can use the Losi 22 items, direct fit. The Durango cups also fit, but are loose on the shock end, some heat shrink can be used to take up the play. (http://msdmodels.ie/zencart/index.ph...roducts_id=514) Or you can use the AVID spring cups. (http://p-dubracing.co.uk/index.php?m...roducts_id=208) MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
#12
|
|||
|
|||
Quote:
Any idea when the associated ones will be back instock. cheers |
#13
|
||||
|
||||
All going well with the post, I should have the AVID and GHEA big bore spring parts, back in stock in the middle of next week.
MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
#14
|
||||
|
||||
I've tried the Kyosho BB Springs last time and they seem to fit my driving style a bit better then the AVID's.
The white KYO rear seems to be exactly in between the two stiffest AVID Springs. Sorry for the Offtopic- Mick, any word on the white AVID Satellite rear wheels? Ron |
#15
|
||||
|
||||
Avid white wheels are on the way.
Please send me a PM with your experience of the AVID springs. MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
#16
|
|||
|
|||
He only supply's these to good drivers rob ;0(
__________________
Gareth Hill Schumacher - Sanwa - LRP - Mb models |
#17
|
||||
|
||||
Any reason no one uses the Schumacher Big Bore springs?
__________________
- Associated B6.1 - - Yokomo YZ CAL3.1 - - JConcepts BJ4WE - - Frankenstein DEX410 - - Schumacher Cougar Classic - - Xray T4 2013- - Tamiya Monster Beetle Black Edition - oOple Trader Feedback |
|
|