sc: Motor and ESC combo

codi jones b4 · #1 06-12-2011

hi I have just bought a durango desc410 and want a good ESC and Motor

thanks Codii

Checa · #2 06-12-2011

I'm using ezrun sc-b combo and have not had any problems

They are about £90 on eBay the only thing you will have to do with the desc410r is raise the centre diff by 1 mm as the motor can is large

Dazzler · #3 06-12-2011

I'll be running my Tekin RX8 and Tekin Pro4 4000Kv set-up for it's first run tomorrow... It's in a DESC410r, so we'll see how it goes...

I was previously running a Novak GTB with a Ballistic 10.5.. So there should be a bit more go!

codi jones b4 · #4 06-12-2011

Quote:

Originally Posted by Dazzler

I'll be running my Tekin RX8 and Tekin Pro4 4000Kv set-up for it's first run tomorrow... It's in a DESC410r, so we'll see how it goes...

I was previously running a Novak GTB with a Ballistic 10.5.. So there should be a bit more go!

let me know haw you get on and also is the pro4 Sensored

Dazzler · #5 06-12-2011

The Pro4 is the latest release from Tekin for SC applications, and it most certainly is sensored.

codi jones b4 · #6 06-12-2011

Quote:

Originally Posted by Dazzler

The Pro4 is the latest release from Tekin for SC applications, and it most certainly is sensored.

what shop did you get the tekin PRO4 from
thanks codi

Dazzler · #7 07-12-2011

I ordered it through MB Models... As always, an excellent service.

HarlowS · #8 07-12-2011

Great choice !!

[QUOTE=Dazzler;591845]I'll be running my Tekin RX8 and Tekin Pro4 4000Kv set-up for it's first run tomorrow... It's in a DESC410r, so we'll see how it goes...

Dazzler · #9 08-12-2011

Well, I most certainly was pleased with the setup...

I had no issue with temps, plenty of torque and more than enough top end speed for our track..

I used basic setting with no timing advance etc. and it still had more to give than could be used.. It seems to have so much capacity to spare in all the concerning areas, I feel like my money has been well spent!

codi jones b4 · #10 10-12-2011

Quote:

Originally Posted by Dazzler

Well, I most certainly was pleased with the setup...

I had no issue with temps, plenty of torque and more than enough top end speed for our track..

I used basic setting with no timing advance etc. and it still had more to give than could be used.. It seems to have so much capacity to spare in all the concerning areas, I feel like my money has been well spent!

what size pinion did you use?

Dazzler · #11 10-12-2011

I used a 14t. Could have easily gone up a tooth, possibly 2.