KF2 Driveshaft Pin Replacement

[bish]

In the Schumacher U1633 speedpack there are two 2.5MMx11MM pins which can be used to replace the driveshaft pins.

How to:

1. Heated up the driveshaft slightly with a heat gun.

2. Support the end of the driveshaft with a small socket and tap out the pin with one of the other smaller pins.

3. Gently tap the new pin into place so it sits equally either side of the driveshaft.

There was not much wear on the Diff outdrives or the driveshaft UJ.

It should get me more drive time before buying a new pair of driveshafts.

Hope it helps someone out