|
#1
|
|||
|
|||
xray t3 geared diff
i used xray t3 rear gear diff last night for the first time seemed ok but i had a small line of oil on my bodyshell after each run any tips on how to stop this small leak ?
|
#2
|
||||
|
||||
Tighten it up a little more I guess would be the one suggestion. Another would be just to ensure the gasket is properly positioned.
__________________
For Custom Decals visit http://www.graphicsbat.co.uk http://www.oople.com/forums/showthread.php?t=62298 |
#3
|
|||
|
|||
i use the spec r gear diff myself it is known for small leaks thats why your better off just getting xray gear diff thats leak free bit pricey but well worth it
__________________
2x club race winner modified TC 2006 yrcmcrc 2011 TC electric club champion |
#4
|
|||
|
|||
i have the xray geared diff but still leaks
|
#5
|
|||
|
|||
try doubling the spacers u get with it the o ring i wouldnt tightened the diff to much and use 1000cst it should work
__________________
2x club race winner modified TC 2006 yrcmcrc 2011 TC electric club champion |
#6
|
||||
|
||||
Hi,
Make sure you havent nipped the O-ring during first installation. a driver had this at weekend he took it out. Cut the nipped section out and it was perfect then. it will have expanded so it will still be long enough hope this helps Matt
__________________
Matt Chandler HPI Europe / Hotbodies / Flux / Edit / SMD / HUDY / RC Bearings / MB Models / XtremeFX race paint http://matthew-chandlers-rc--blog.blogspot.com/ |
|
|