Hop ups?

[jim76]

Originally Posted by SuperSparkSteve

I was thinking about buying the battery bar and the front arm mount if there cheap. if they dont fit then maybe attack it with a dremmel.

it only costs £2.50 so not a big gamble. You would probably have to ream out the holes as the kit is metric unlike B4 pins

[SuperSparkSteve]

At those prices i think i will get a madrat and use my B4 as a back up car!

[jim76]

exactly! just swap the B4 shocks onto it and you will be well sorted!

[jameswilkinson7]

Put some losi shocks on the back of my dads madrat... That handled really well on shiny floor.

[DCM]

there isn't anything wrong with the X-Pro shocks though (except the o-rings and springs), mine is currently running B4 silver springs all round.

[qatmix]

where do you order the cheap hop ups from? I cant find anything

[stampede vxlboy]

who will sell them in the uk madrat parts ? carbon parts all the parts i need. but i got told the xpro parts what better i got a xpro t plate and its snap again they said it was made of carbon and plastric there crap plastric parts just fall to bits

[jim76]

Ryan is the only one currently making the carbon parts in the UK. You'll just have to wait until he makes a second batch.
The X-pro t-piece will break just like the madrat one because THEY ARE THE SAME PART.

as previously stated, drive slower and more carefully until you master things. And don't go for silly huge jumps while bashing. No car will stand up to bad landings at speed.

[stampede vxlboy]

my mate snap 1 than ryan made a little stone snapped it. there not strong at all. ryan not making any more i dont think so. he email me say he was not making anymore as it was not worth is while and the time as well to make them

[Nick Goodall]

Originally Posted by stampede vxlboy

my mate snap 1 than ryan made a little stone snapped it. there not strong at all. ryan not making any more i dont think so. he email me say he was not making anymore as it was not worth is while and the time as well to make them

Seriously what are you trying to say? I read that as "My mate snapped one that Ryan made, just a little stone snappped it"

Is that what you mean as i find it hard to believe you snapped a Carbon one easily.

[Jamie.T]

My mate snapped a carbon one too. The rear section where it has been machined down very thin is extremely weak. One little knock to the rear and the rear lower arm pin holder gets torn off, taking the thin carbon with it.

Im currently trying to re-deign a T plate that is stronger at the back. Will hopefully be in a few weeks.

[DCM]

Jamie, get me one, that you design, and I will tell you if it will snap. I ran the Ryan T-Piece on Sunday, and I did some decent destructive testing on it..... If you don't re-seal the edges and areas of machining, they will be weak spots.

Right now, I need to get some serious weight into my car.

[Jamie.T]

No problem Steve. Will let you know when theyre done.

p.s, if you want some more weight in your car, i can sit on it if you want.

[DCM]

feck me, I want it to stop wheelying, not die a nasty death!! you should of seen it at COBRA last weekend, with a 7,5 in it, lifted the front almost everywhere!!

Got to get a B4 slipper on it though, the kit spur is pants.... more oval than an egg.

[stampede vxlboy]

yes snap the carbon t plate from ryan

[jmsjms]

Where do you buy these parts ? i would like a link please http://www.teamcracing.net/index_pro...1&imgid=528838

[budgio]

OK prices for the hop ups

DIRECT FROM TEAMC:

C TYPE HOLDERS 25/30 DEGREE $16.50 SET
REAR ARM MOUNT $6.30 SET
FRONT ARM MOUNT $4.10
SPRINGS RED/BLUE/PURPLE (HARD/MED/SOFT) $1.50 SET
BRASS BATTERY TRAY $11.00
NEW MOTOR MOUNT $4.30
SERVO MOUNT X2 $5.10
CVD,S FOR ASSOCIATED RIM X2 $9.00
HEX MOUNTS X4 $6.80
***TC0236 *** are not yet available
Email them direct to order

[madwestmo]

i messaged them a few days ago now and still no reply

[overson]

Hi try and contact Fusion Hobbies they deal with a lot of ansmann cars.


http://www.fusionhobbies.com/Ansmann...arts-s/184.htm

[jim76]

the upgrades aren't available in the UK yet. Only from Team C direct.