|
|
#1
|
||||
|
||||
H2 hybrid
Hello
I recently treated myself to one of these little beauty's but I have been reading mixed threads on what to change and who's parts fit what. I was wondering if anyone has a list of the main parts that are best exchanged for the ones that come with the pro kit? Ie losi rear hubs etc Just so I can go buy the parts and swap before I start racing next month. Many thanks Ps. This car is a bargain! |
#2
|
|||
|
|||
I've changed nothing on mine,,,run it as it is to start
|
#3
|
||||
|
||||
a friend of mine has one and his drive shaft broke and he phoned a supplier i think and asked about new ones and they said it was a known week point on some early kits so supplied him upgraded ones free of charge i can try and find out who he spoke to and pm info
__________________
Schumacher kf Schumacher sv2 Durango Dex210 Carisma gtb x2 Schumacher gt12 x2 |
#4
|
||||
|
||||
Run it as it is first.
The only change should be springs (the kit ones are junk). Either Losi or Ae big bore ones. If you've got a kit with the early style driveshafts, they will at some point break. Keep the receipt, and e-mail CML when it happens. More than likelly they will replace them with the new style ones for you. Once you've run it, you'll find out what, if anything, breaks and can consider what needs changing for your driving, for either uprate or alternative parts. |
#5
|
||||
|
||||
Is there a to tell whether the kit you've bought has the new driveshafts included, especially if you didn't already have the old type to compare to ?
__________________
TLR 22 3.0/3300kv brushless Lunchbox/Helion 2wd sct/Dromida MT4.18/Orlandoo F-150/Mardave Cobra/Re-re Cat xls w/uprated tranny/Re-re Top Force/Carisma GT24R http://www.norfolkbuggyclub.moonfruit.com/ |
#6
|
||||
|
||||
The hex pins on the new style are 1.5mm dis, the old style ones are 2mm.
Measure up/ compare to others you've got. |
|
|