|
#1
|
||||
|
||||
Setup for Astroturf , Madrat/X-Pro
Hello,
have anyone a (basic)setup for astroturf? best regards rené
__________________
Sponsored by Absima / Team C and LRP/Sanwa/Jconcepts
|
#2
|
||||
|
||||
Quote:
i run Front 40wt oil med springs middle on tower inside on wishbones inside camber link on car outside on hubs Rear 30wt oil Hard springs inside on tower inside on wishbone inside upper camber link on car inside upper camber link on hub (middle on ali hubs with 2mm under the ball stud) long wheel base tight diff tight slipper
__________________
DO NOT BUY/SELL TO THIS USER. |
#3
|
||||
|
||||
thank you
ansmann springs? middle = red? and hard = blue? an what is your camber?
__________________
Sponsored by Absima / Team C and LRP/Sanwa/Jconcepts
|
#4
|
||||
|
||||
Quote:
thats right i run 1 degree front and 2degree rear i will put it on petit soon http://www.petitrc.com/setup/kawada/...KawadaB2X.html the astro standard is mine but it will have the other details added soon thanks Carl Rowlinson
__________________
DO NOT BUY/SELL TO THIS USER. |
#5
|
||||
|
||||
use you losi or asso shock oil?
__________________
Sponsored by Absima / Team C and LRP/Sanwa/Jconcepts
|
#6
|
||||
|
||||
__________________
DO NOT BUY/SELL TO THIS USER. |
#7
|
|||
|
|||
I have a Great Astro set up but it is very twichy!
AE 35wtg in the front with standard pistons with Black springs(medium) Front camber link on the longest with NO washers. 30' front caster. Schumacher Yellow mini's with 1 outer row cut off and a soft insert. AE 30wtg in the rear shocks with a 1.5mm hole drilled in the standard piston. Black springs(Yellow=soft. Black=medium. Red=hard) Camber link on the shortest and outer top on the shock tower Alloy rear hubs. Short wheel base All the shocks are in the middle on the towers and the inner on the wishbones I have made a front wing which helps at high speed turn in. I am running about 50grams of weight on the front end. 5mm of anti squat Schumacher mini's on the rear with a soft insert. wing on the lowest setting with about 2mm left on the dam( proline wing ) about 20mm ride height all round( it changes to track conditions) Cant think of anything else. |
#8
|
||||
|
||||
Hi woody,
thank you =) From what manufacturer are the springs? Sorry for my english
__________________
Sponsored by Absima / Team C and LRP/Sanwa/Jconcepts
|
#9
|
|||
|
|||
Quote:
If you like alot of possative steering swop the Acurman link round to make the ball stud more forward. You will have to modify it stightly though but it makes it turn on a pin head. |
#10
|
||||
|
||||
Have the ansmann springs a another colour as the team c springs?
info from a another-forum about the team c springs: Quote:
__________________
Sponsored by Absima / Team C and LRP/Sanwa/Jconcepts
|
#12
|
|||
|
|||
The more forward the ball stud is on the the acurement link (not the wheel end), will make the steering more aggressive.
|
#13
|
||||
|
||||
woOdy,
can you say the springrate (Theorical Rate lb/in) for your ansmann springs?
__________________
Sponsored by Absima / Team C and LRP/Sanwa/Jconcepts
|
#14
|
|||
|
|||
No Sorry. Only length.
|
#15
|
||||
|
||||
Hehe thats no need for that...Stagger ribs and spikes in the rear on te truck..on our Astro truck..it is sick fast around the lap..but little to much steering
|
|
|