|
#1
|
|||
|
|||
CVD Rebuild Kit
Can you buy a cvd rebuild kit (without the axle / dogbone)?
I have about 4 pairs of unused axles and want to try and use them. |
#2
|
||||
|
||||
I believe you can. I need to replace my rear fs2 driveshafts and so I need um510-01
Look at the exploded diagram for the car and you should see part numbers for the various bits. What car is it? |
#3
|
|||
|
|||
I need them for my MCS and RB5.
|
#4
|
||||
|
||||
Look at the exploded diagram relating to the correct RB5 model, RB5, SP2, WC etc and you should be able to determine what part you need.
Is there a length etched on the driveshafts? Sorry I know DB1, vega, fs2 but not MCS |
#5
|
|||
|
|||
MCS is the same as the RB5/Vega.
62.5 I think. |
#6
|
|||
|
|||
I dont need the driveshaft or axle its the parts that join them together.
According to the manual they dont have a part number. UM510-02 is the axle (including the parts I wont) UM510-01 is the driveshaft I guess i will just have to buy more axles. |
#7
|
||||
|
||||
Phil, I'm sure you can by the parts you need without axles but not sure of the part number, might be a touring car number.
Nick Caro @ JE Models will know though. |
|
|