Show me your Durango's

[Paultje040]

Still in need of some stickers, just a few though.

[MHeadling]

My latest addition to the fleet:





Spare shell is off for painting in my usual colours

[Candyman]

[spindles69]

Here is my 2wd 410 ready for the weekend.

[Kosmickid]

Originally Posted by spindles69

Here is my 2wd 410 ready for the weekend.

Lovely! What bodyshell is that?

[OneKiwi]

Thats the penguin design one you can get them from ebay

[badgio]

First go with liquid mask... In fact first go at spraying. Might be a bit more adventurous on my second attempt but I do like simple design so I'm pleased with it!

I'm sure I heard someone mention a protective coat you can spray/paint on to help look after the paint, anyone have an idea where I might find this?

[Chop chop]

New look for the rtr car

[Fernandez]

[Tomb]

Here is my Dex 210.

Savox Servo, Hobbyking Xcar 120 A esc (hobbywing software) Turnigy red can 7.5turns motor.

[cperry]

Finally finished (minus a coat of paint).

Here's my new DEX410v3 with 5.5t Speed Passion motor and Revention Combo, Code RC gear and Orion 5500 90C batteries.

Now just need the weekend for its first run out.

[cperry]

Not to happy about the apparent lack of a micro receiver for the code rc gear, had to use the standard sized part on its side.

[mattr]

Three things, that servo wire looks like it might get munched by the servo saver as you steer, might be worth moving it, or clipping it to something out of the way. The motor wires aren't held away from the front prop, if they end up resting against it, you are going to have some fun. The saddle pack jumper lead might need shortening so it doesn't touch the rear prop.

[cperry]

I had the same thoughts, nothing a few plastic ties won't sort out.

I was going to clip the jumper lead to the battery clamp, that'll keep it off the prop and stop me loosing one every time I take the batteries out.

[mattr]

I just made up half a dozen of them, in assorted lengths, to match the saddles i had!

[mistkerl]

[percymon]

Very nice - just got my DEX210 built to a RM3 rolling chassis - body already painted so just electrics to go now

[percymon]

Originally Posted by percymon

Very nice - just got my DEX210 built to a RM3 rolling chassis - body already painted so just electrics to go now

Not my best effort with a shell, but not too bad for rattle cans..

[Artie Fuffkin]

Originally Posted by Candyman

Stone Cold Beauty

[jayropes]

GOLDFINGER v3