Lazer zxr

[HKS_TRD]

Thanks for posting that

So that car on eBay doesn't have a genuine LAW-9 on it then

Do you happen to have a LAW-9 you would be willing to sell?

[lllyf]

kyosho has genuine part carbon chassis & carbon upper deck for zxr LAW-10 & LAW-11,but I don't know if they are MKII chassis & upper deck

[HKS_TRD]

I think they must be for the MKII doesn't make sense for them to b anything else.

So this car must have an LAW-11 Upper Deck and a LAW-3 Chassis with the extra holes drilled to work with the LAW-11

[lllyf]

regret that I have one set MKII chassis and upper deck but not sure if they are genius kyosho parts，I have one LAW10 LAW11 header card picture but does not have full view，very confused

[isobarik]

Illyf

Cool never seen the original law10/11

awsome find upperdeck looks super.

I have the HPI upperdeck for the mkI the only one i have seen since the
rccar action magazine.

you dont have anymore goodies like the HPI zxr chassi i know that one here or on rc10talk has one just cant remember who.

mvh isobarik

[isobarik]

Originally Posted by HKS_TRD

I think they must be for the MKII doesn't make sense for them to b anything else.

So this car must have an LAW-11 Upper Deck and a LAW-3 Chassis with the extra holes drilled to work with the LAW-11

Should be correct

Btw i have those battery bars in kyosho carbon got them from ema with my law-3 chassi

damn i got to repost all the pics..

Any one here that has an rb5 ???
mvh isobarik

[HKS_TRD]

Did those battery bars ever get sold by Kyosho?

I'm wondering if there is any carbon you can buy that looks really close to Kyosho Carbon that one could send to Fibrelyte to make some pieces from

Was there ever a company called team weave?

ISO: You have to post pics ASAP!

[HKS_TRD]

Originally Posted by lllyf

regret that I have one set MKII chassis and upper deck but not sure if they are genius kyosho parts，I have one LAW10 LAW11 header card picture but does not have full view，very confused

I'm only guessing here but I think those bits may not be Kyosho because some of the corners are rounded off and I imagine the Kyosho carbon bits would have been the exact same shape as the FRP parts

I'm only guessing here

[Welshy40]

Im unsure on that, possible one is kyosho but quite possible the others HPI. May also be another make like wasp etc etc

[HKS_TRD]

I'm pretty sure its the same parts just turned upside down in one of the pics

[isobarik]

Originally Posted by HKS_TRD

Did those battery bars ever get sold by Kyosho?

I'm wondering if there is any carbon you can buy that looks really close to Kyosho Carbon that one could send to Fibrelyte to make some pieces from

Was there ever a company called team weave?

ISO: You have to post pics ASAP!

Fibre-lyte has some carbon that are not so glossy but dont know how it look likes but i will know in a week or two.

yeah i know i have to ......

mvh Isobarik

[isobarik]

Originally Posted by HKS_TRD

I'm pretty sure its the same parts just turned upside down in one of the pics

correct ....

mvh Isobarik

[isobarik]

regarding the glossines , sorry cant get the right word for it but any way

fibre-lyte glossy i would put WASP chassis here but any one with the best of both worlds could tell the differance maybe EMA .

HPI semi glossy i have un upperdeck from them so im guessing. i would put the new stuff from kyosho here hard to tell since pics on ebay are semi glossy and jared tebo from the worlds in finland -11 had some special made stuff and they looked like the old stuff.

Kyosho not glossy i have had the TOMS and the law-3 they have the same materiel ok not the same but similar even had the law-9 same stuff....

mvh Isobarik

[HKS_TRD]

Thanks for that ISO, keen to see how your non-glossy stuff from Fibrelyte turns out. I have compared my TOMS chassis to the fibrelyte and there is a huge difference.

I have a rear ZX-R tower that has a pink tinge to it, it came with some other stuff I'm not sure who made it. I'll be selling it when I get off my butt and take some pics

Did I ever mention I have a NIP LAW-2 stabiliser set? I'm not sure what it will go on yet

[isobarik]

Originally Posted by HKS_TRD

Thanks for that ISO, keen to see how your non-glossy stuff from Fibrelyte turns out. I have compared my TOMS chassis to the fibrelyte and there is a huge difference.

I have a rear ZX-R tower that has a pink tinge to it, it came with some other stuff I'm not sure who made it. I'll be selling it when I get off my butt and take some pics

Did I ever mention I have a NIP LAW-2 stabiliser set? I'm not sure what it will go on yet

yeah i have that too.....dont know if i use it dough....

[Welshy40]

Wasp bought from fibre lyte so should at least answer one question. I know this as ComCom and Wasp and another company bought my design chassis from Fibrelyte.

Now as im talking about my chassis, ive some news that you all have been waiting to hear about. Drum roll please.....the first one (mine) will be done by end of July or start of September. Ive laid down the gauntlet as i need it in October so my own hole layout will be the first and then its whatever layout you want on your chassis you can have, even my layout which was never sold to the public or ComCom or Wasp etc etc

[HKS_TRD]

Thats great news.
Is the tub shape going to be compatible with the ZX-R or the ZX-S body?
I'd love to have one drilled to take Mid Gearboxes

[isobarik]

Originally Posted by HKS_TRD

Thats great news.
Is the tub shape going to be compatible with the ZX-R or the ZX-S body?
I'd love to have one drilled to take Mid Gearboxes

would say ZXR its my bet ...

vh isobarik

[isobarik]

lllyf

now that i do know that you have some special chassi for the lazer show em all i know its in there some where ...

mvh Isobarik

[Welshy40]

Originally Posted by HKS_TRD

Thats great news.
Is the tub shape going to be compatible with the ZX-R or the ZX-S body?
I'd love to have one drilled to take Mid Gearboxes

Its for the zxr shell so the parma tomcat shell is a perfect fit. The zxs wont fit.