Lazer zxr - Page 216

HKS_TRD · #**4301** 19-09-2013

Quote:

Originally Posted by Welshy40

Then the last item the little brackets, ok I am having a few made but will not be made as they are difficult to make. Once I have tested I will be selling with bearings and the screws and bits need to basically fit to your gearboxes, ok after ive made a manual on how to do it so all can then race without the fear of snapping the rear belts.

Let me know your thoughts on this.

I'll be up for one of these brackets for my runner tub when you get them made. Any chance I could have one made from twill weave carbon?

Welshy40 · #**4302** 19-09-2013

Quote:

Originally Posted by HKS_TRD

I'll be up for one of these brackets for my runner tub when you get them made. Any chance I could have one made from twill weave carbon?

Unfortunately unsure but tbh when fitted its out of sight so wont matter what weave it is seeing as its sitting behind the motor plate.

HKS_TRD · #**4303** 19-09-2013

Fair enough that makes sense
Stephen has sent my Ultima parts to me now so stand by for another project!

Welshy40 · #**4304** 19-09-2013

Quality, mate you have the bug big time now

Welshy40 · #**4305** 20-09-2013

Ok chassis has arrived and will be building tonight. Looks stunning

HKS_TRD · #**4306** 20-09-2013

Quote:

Originally Posted by Welshy40

Ok chassis has arrived and will be building tonight. Looks stunning

Excellent news!

We eagerly await pics

Welshy40 · #**4307** 21-09-2013

Bad news unfortunately. Luckily thats why its a prototype. Side wall needs work as its too high at the front end, front section where the rear front pivot block is too long so stopping the free movement of the wishbones and also where the gearcover is the sidewall is nudging into it so the sidewall needs to be rounded off or cut back a bit. Bit gutted but fibrelyte did nothing wrong and needs to be sent back for ammendments before i can be happy with it

HKS_TRD · #**4308** 21-09-2013

Bummer, but don't consider it a failure, its just one more step towards getting it right

Maybe the sidewalls of the one you made the mould from are spot on only needing the couple tweaks I had mentioned to you, even my old tub here has issues with clearing the gear cover but more from the point that you cant remove it with the gearbox on the car, it does still actually fit

Welshy40 · #**4309** 21-09-2013

Im not happy with it so wont be putting it onto the market until im happy

DEXtrain · #**4310** 21-09-2013

Have more close photos of the underside ? is it rough? Can they make similar for other cars or this is just an exceptional batch ?

Quote:

Originally Posted by Welshy40

Ok, its just being finished off but all cutting and drilling has been done to my specification, but as mentioned its down to you guys to decide exactly what you want so be sure you get it right when ordering. I should be getting on Friday.

Price will be £120 for the chassis, obviosuly not including P&P. Once I am happy with the build and fitting I will give the go ahead to Fibrelyte, and if all goes to plan that should be on Monday / Tuesday.

Welshy40 · #**4311** 21-09-2013

Quote:

Originally Posted by DEXtrain

Have more close photos of the underside ? is it rough? Can they make similar for other cars or this is just an exceptional batch ?

I will photo it for you but design flaws need ironing out first before im happy with the design. You can have identical to mine if required or as whatever you desire but only once i am satisfied with the finished prodoct

DEXtrain · #**4312** 30-09-2013

Quote:

Originally Posted by Welshy40

I will photo it for you but design flaws need ironing out first before im happy with the design. You can have identical to mine if required or as whatever you desire but only once i am satisfied with the finished prodoct

Yes post some close photos of the underside and let me know if they can do one for other cars too

Welshy40 · #**4313** 01-10-2013

I believe Ive done another master piece. Iso "whos the daddy!!!"

kek23k · #**4314** 03-10-2013

Quote:

Originally Posted by Welshy40

I believe Ive done another master piece. Iso "whos the daddy!!!"

Pics please!!!

Welshy40 · #**4315** 03-10-2013

Quote:

Originally Posted by kek23k

Pics please!!!

Iso asked me to design a three piece chassis for the zxr for him. I will post a pic when i have a chance.

Welshy40 · #**4316** 03-10-2013

Ok its back and had the mods done to it. It look sstunning and tonight its build time.

What doyou think?

HKS_TRD · #**4317** 03-10-2013

Quote:

Originally Posted by Welshy40

Iso asked me to design a three piece chassis for the zxr for him. I will post a pic when i have a chance.

Is this something that we could buy from fibrelyte or a one off?

Tub is looking good, get her built!

Welshy40 · #**4318** 03-10-2013

Quote:

Originally Posted by HKS_TRD

Is this something that we could buy from fibrelyte or a one off?

Tub is looking good, get her built!

I will have a word with stephen about it and dont see why not. Problem is its flat so i guess if you want a degree or 2 kickup then you need to make it from alloy.

kek23k · #**4319** 03-10-2013

Updated pics look droolworthy! Looking forward to the built pics

HKS_TRD · #**4320** 03-10-2013

Quote:

Originally Posted by Welshy40

I will have a word with stephen about it and dont see why not. Problem is its flat so i guess if you want a degree or 2 kickup then you need to make it from alloy.

Whats the advantage of it being three piece if there is no kick-up?