|
#1
|
||||
|
||||
Losi shocks on the X60
Hi, Could anyone tell me the sizes of the losi shock bodies, shafts and spring lengths please to fit on the X60.
I have some old losi kits and hope i can use the shocks that are just sitting there???? Thanks , Paul..
__________________
Team External, With only the outside chance! East Anglian ramp construction guru......Wiggles |
#2
|
|||
|
|||
1.2 rears and 0.9 fronts, shafts and bodies. You use rear springs all round.
E. |
#3
|
||||
|
||||
To put it another way, rear shocks from the xx-4 go on the rear of the X - 60. Shocks from the rear of a xx- or xxx- Losi buggy go on the front of the X - 60.
|
#4
|
||||
|
||||
Thanx guy's.
Any thought's on a set up for indoor racing (Petit)? Paul..
__________________
Team External, With only the outside chance! East Anglian ramp construction guru......Wiggles |
#5
|
|||
|
|||
Chazz, XXX buggy rears are differnet (slighly to Losi truck fronts we are used to. As E has siad we use 0.9 bodies AND 0.9 shafts, newer CR trucks use 0.9 bodies and 1.0 shafts (same as buggy rear)
It is worth LOSI shock users beareing this in mind when referring to set ups etc since shocks on the front of one truck may be 2 - 3mm or so different in length to those on some others.........
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
|
|