|
#1
|
||||
|
||||
Just ordered X-6
I've seen the light. What a car. Normally I shy away from conversions and the like, but I tried my mates X-6 a week or 3 ago and you just cant deny the facts. It was unbeleivable. I have never driven anything that comes close. So thats it. Hopefully it will arrive tomorrow and then I'll be in build mode. Anything I should watch out for? Any tips or hints would be gratefully received. I have losi shocks, e-speed camber thingys and rayspeed hubs and k-factory tower on back order. Also its coming with cr axles? Was told to get them. Thanks in advance.
__________________
PBM Racing 01773 769323 TEAM XRAY RC DISCO |
#2
|
||||
|
||||
__________________
Life's too short to go slow! www.ymr.no Tech Tips, HopUps & Bling Xray 2014 XB4 4WD & 2WD | B4 FTW Night Fox XL | Mugen MRX-5 | RB | Futaba 3VCS FASST | Faskolor Visit my showroom |
#3
|
||||
|
||||
Your bases sound covered, one thing though it's a personal preference. Use the stock B4 (FT ideally) servo mounts and drill the chassis. You can mount the servo a few mm further back which means you won't have to dremel any of the front area where some servos catch.
Also if you have the plastic (not E Speed) motor plate clamp, put nuts on the other side of the screws so you can do it up nice and tight and not have to worry about stripping the plastic. Build directly with Ellis latest setup!
__________________
Nortech is ACE! |
#4
|
||||
|
||||
or simply use a low profile servo
__________________
Life's too short to go slow! www.ymr.no Tech Tips, HopUps & Bling Xray 2014 XB4 4WD & 2WD | B4 FTW Night Fox XL | Mugen MRX-5 | RB | Futaba 3VCS FASST | Faskolor Visit my showroom |
#5
|
||||
|
||||
Wouldn't you still have to use B4 posts and mount further back to avoid dremelling as the front profile I've assumed is essentially the same as any KO or similair servo?
__________________
Nortech is ACE! |
#6
|
||||
|
||||
No, direct fit. See tech section on www.2wdrc.com
__________________
Life's too short to go slow! www.ymr.no Tech Tips, HopUps & Bling Xray 2014 XB4 4WD & 2WD | B4 FTW Night Fox XL | Mugen MRX-5 | RB | Futaba 3VCS FASST | Faskolor Visit my showroom |
#7
|
||||
|
||||
Quote:
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
#8
|
||||
|
||||
OH right, nice one. Personally I still prefer the B4 FT mounts if you have them already, and they are blue
__________________
Nortech is ACE! |
#9
|
||||
|
||||
Don't forget the Shimz.
Terrific vfm - check Glenn out at Chequered Flag Racing and he'll sort you out. Also whilst I'm shamelessly plugging stuff - check out this month's Racer mag (and next month's - heh heh heh) All the beanz are spilled... Dan's right though - Big E's set up is awesome - you won't go far wrong. |
#10
|
||||
|
||||
Shimz ordered too. Thanks for the support chaps. Cant wait to run this bad boy.
__________________
PBM Racing 01773 769323 TEAM XRAY RC DISCO |
#11
|
||||
|
||||
that's just put the price up
thanks for the plug Quote:
Quote:
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
#12
|
||||
|
||||
Don't worry - I haven't forgotten.
pm me your details and I will sort out as soon as next month's comes out. Have a copy of this month's already set aside. |
#13
|
||||
|
||||
Its come.
Big thanks to DMS Racing. I only ordered it bout 1.30 yesterday and it was here before 8 this morning. That's service. I'm going to be keeping thier number on speed dial. Thanks again chaps. My s/h b4 hasn't even come yet.
__________________
PBM Racing 01773 769323 TEAM XRAY RC DISCO |
#14
|
|||
|
|||
Glad it arrived nice and quick for you, thanks for the business!!
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#15
|
||||
|
||||
No worries mate. Please let me know when the back order bits arrive. Thanks again.
__________________
PBM Racing 01773 769323 TEAM XRAY RC DISCO |
#16
|
|||
|
|||
Some bits turned up late last night from a delivery we had in person from the sales rep, these left for you this morning.
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#17
|
||||
|
||||
Excellent. Thanks very much.
__________________
PBM Racing 01773 769323 TEAM XRAY RC DISCO |
#18
|
||||
|
||||
Si, You have PM regarding the shell.
|
|
|