|
#1
|
|||
|
|||
Buggy tyres for road?
I have an Associated B4 which I run on my drive, in the street and on the pavement quite a lot. Can anyone suggest a good tyre choice. I've worn through a couple of sets of standard ones pretty quickly. I'm guessing there must be something more suitable and durable available for street use? Thanks
|
#2
|
||||
|
||||
Proline do the road rage tyre but it's pricey!! There's also Schumacher venom but I still think they would wear pretty quickly.
For bashing around at home I'd use something like fastrax arrows or some other cheaper alternative.
__________________
TLR 22 3.0, Yokomo YZ-2 (Original), YZ-2 DT, YZ-2 CA, PR SB401LW, Associated SC6.1, Carisma 4XS '17, Carisma 2XSF, Team Durango DETC410, Tamiya M07, ARC R10 |
#3
|
||||
|
||||
Try Schumacher road and track green compound I’ve used them outside on tarmac on my L1 last a lot longer than anything else I’ve tried 👍
__________________
Schumacher Cat L1 Evo Schumacher Cougar Laydown Schumacher Cat L1 Schumacher Cat K2 Schumacher KF2 Tamiya DF03 Dark Impact Tamiya TB04 Vintage Tamiya TL01 Baja Champ Vintage Tamiya Striker |
#4
|
||||
|
||||
For Proline I'd look at the SlideJob and Inversion. Not cheap and for both tires, particularly the inversion, the available compounds are rather soft. Still, the treads have potential, the SlideJob having block-style pins grouped very close together and the Inversion has a low-profile, road tire-esque tread.
JConcepts offer slick-like tires with a slight tread on them: the Octagons. They also have slicks without any tread, as do Sweep tires, but slicks might not handle dust so well, like worn tires If that doesn't work, maybe stay on the lookout for used tire lots? If I go driving on tarmac I just use up a set (or two) of tires that are worn for track use but still have a little profile left on them... Last edited by Origineelreclamebord; 28-09-2020 at 05:52 AM. |
|
|