Weight of your TRF511?

[F-1]

Hello!
What weight has your Tamiya TRF511 cars? Mine was 1750g, I think what it's too much.
Thanks

[fastinfastout]

1750grams?

what gear are you running?

I had my 501x at 1620 grams

[F-1]

I'm running Speed Passion GT 2.0 ESC and V3 motor, Intellect 5200mah 45c lipo, Ko Propo 2413 servo, Spektrum micro receiver, MRT transponder, and of the heavy option parts I has Fredriks Diff covers, Aluminium rear hubs and front caster blocks. Losi wheels with JC tyres.

[AJ Roberts]

I wonder whats lighter?? a DB01R or a TRF511, depends alot on the battery pack you are running

[AJ Roberts]

Originally Posted by DB01R

I wonder whats lighter?? a DB01R or a TRF511, depends alot on the battery pack you are running

My DB01R is 1640g

[Jan Larsen]

1630g with IB4200 lipos.

[F-1]

IP 5200 weigh 279g, IP 4200 weigh 233g.

[Fredrik Emilsson]

Ok, it´s heavy. But how is she on the track?
Had my 501X WE at 1800 grams (with Nimh batteries), worked just fine.

My 511 weighs 1680 with:

• IB5200 cells
• Novak Ballistic
• LRP SXX TC (without cooling fan)
• Futaba 9550 servo
• Transponder
• Spektrum receiver
• Relux wheels with Holeshot tires
• alu caster block
• alu hub rear
• My LiPo trays (approx 7 grams)
• My Long rear diff cover (approx 14 grams)
• My Short front diff cover (appox 7 grams)
• 511 body and undertray + wing.

Other than that standard (high traction arms etc). No titanium or alu screws.

[Piman]

Mines 1645g with the alloy front and rear hubs, alloy steering rack and LRP lipos. No added weight & balanced over the jumps.

James

[F-1]

Originally Posted by Fredrik Emilsson

Ok, it´s heavy. But how is she on the track?
Had my 501X WE at 1800 grams (with Nimh batteries), worked just fine.

My 511 weighs 1680 with:

• IB5200 cells
• Novak Ballistic
• LRP SXX TC (without cooling fan)
• Futaba 9550 servo
• Transponder
• Spektrum receiver
• Relux wheels with Holeshot tires
• alu caster block
• alu hub rear
• My LiPo trays (approx 7 grams)
• My Long rear diff cover (approx 14 grams)
• My Short front diff cover (appox 7 grams)
• 511 body and undertray + wing.

Other than that standard (high traction arms etc). No titanium or alu screws.

Mine car worked fine too I think that if the car will have smaller weight (at least 1700 or less) it will works even better.
By my car there is other screws - Square, not titanium.
The Speed Passion is heavier than LRP SXX, but not much more.

[Lee Martin]

My car weighs 1620.

With added Rudebits weights in centre - Freds lipo tray and diff covers and Speed Power lipos.

[Rich D]

Using Fredriks template

My 511 weighs 1568 currently with:

• Speedpower 4200 Lipo
• Speed Passion 5.5R
• LRP SXX TC (with cooling fan)
• KO 2413 servo
• Transponder
• KO 302F Receiver
• Std wheels with Schumacher tires and inserts
• alu caster block
• alu hub rear
• full alu steering parts
• Rudebits Lipo Tray with 2 parts fitted in the centre
• Full Titanium Screws, Ballstuds and Turnbuckles
• Ceramic diff balls front and rear
• Fredriks short rear diff cover
• 511 body and cut undertray + wing.
• Chassis tape on underside

Going to add weight to make it up to 1590 ish for minimum weight