|
#1
|
|||
|
|||
B44.2 questions
Hi all I have 2 questions that I would like answering please, first is I'm running a 18t pinion on a 81t spur with 6.5 motor and wondered if it's best if I change my pinion to a 24t as I've seen others do it and my second question is I'm running Durango gear diffs which I'm happy with but I'm finding my slipper just won't slip Evan when it's backed right off, I've renewed all pads and put it back together as per instructions, any help on both questions will be appreciated
|
#2
|
||||
|
||||
Can't really help with the slipper issue - I'm guessing you've rebuilt it as per the manual?
18T with a 6.5 seems a bit low unless you are on a really small track. I'm indoors on astro with a 81/21 split running a 6.5 motor on a Hobbywing 120A ESC running MOD software.
__________________
|
#3
|
||||
|
||||
21/22 on 6.5 kit spur
Rebuild your slipper again you must have something wrong make sure all parts are as per manual I've not had any issues with the slipper in my 44.3 which has gear diffs
__________________
|
|
|