|
#1
|
|||
|
|||
Tekin Rx8 problems
Hi all
Running Pro4 4600 motor and RX8 in my SCTE It has run without a glitch for the last 6 months. Racing on Sunday and it only managed a few laps before slowing dramatically as if shutting down on thermal overload. The motor and ESC are cool to touch and the LED's are telling me all OK! I've tried another battery, checked all the wiring, tried changing the esc settings (more current limit on) and everything else I can think of. The only thing different from last race-I have downloaded and installed the new Vegas software. Anyone any ideas or come across anything similar?
__________________
SCTE, XB4, TEKIN Loads of others in bits amongst the broken planes and helicopters!!! |
#2
|
||||
|
||||
should try it with the old software again to rule out any software problems. also check the solder on the solder tabs behind the end plate.
__________________
Tekno RC EB48.2 Tekin Savox Tekno RC EB48 Tekin Futuba Desc410r Tekin Savox |
#3
|
|||
|
|||
Re:
Do you know where I can get a copy of the 223 software? The new one has overwritten the old one on my PC and the Tekin site only seems to have the new one.
__________________
SCTE, XB4, TEKIN Loads of others in bits amongst the broken planes and helicopters!!! |
#4
|
||||
|
||||
I didn't know there was a new software download available!! What is the advantage over 223??
|
#5
|
|||
|
|||
The 224software is mostly for the New gen2 stuff but allegedly offers better performance for the RX8 and RS/RSPRO-or not in my case!!!!!
__________________
SCTE, XB4, TEKIN Loads of others in bits amongst the broken planes and helicopters!!! |
#6
|
||||
|
||||
..... are the older versions not available when you have the Hotwire connected to your speedo .... I'm sure they are on mine.
The previous versions of Hotwire f/w including ESC software is available on the Tekin website, from the homepage left hand panel under 'software' .... 'hotwire'.... several there... Just realised thats a list not the actual software .... i have the 8.4.1. .exe on my laptop its about 6Mb tho..... don't think i can e-mail it ... Last edited by redonesgofaster; 29-04-2013 at 08:27 PM. Reason: error |
#7
|
|||
|
|||
The old 223 has disappeared from the list on the Hotwire interface- now only shows 224 in the list on the right of the panel
__________________
SCTE, XB4, TEKIN Loads of others in bits amongst the broken planes and helicopters!!! |
#8
|
|||
|
|||
I have not tested the 224 yet so i can not comment
I think i do hqve a copy of the 223 and if you pm me your email i can mail it to you or stick it onto my ftp server for you and you can grab it there this evening Cheers Levon
__________________
[CENTER]TKRrc[/CENTER[/URL]] |
#9
|
|||
|
|||
Quote:
I can not find it sorry what I have done is installed the new version and it works with the 223 if you plug it all in again and then click on advanced there should be options for esc versions.... can you flash it to the 224 or 223? give that a try first and let us know how you get on pls m8 the 238 is for other esc's not the rx8
__________________
[CENTER]TKRrc[/CENTER[/URL]] |
#10
|
||||
|
||||
Quote:
Or if your going to the national at southport this weekend I can pop it on a memory stick ... I'm on call this weekend but hope to get down at some point over the weekend. Ian. |
|
|