Go Back   oOple.com Forums > General > Electrics

Reply
 
Thread Tools Display Modes
  #1  
Old 30-07-2008
Red-Bull-Racing's Avatar
Red-Bull-Racing Red-Bull-Racing is offline
Member
 
Join Date: May 2007
Posts: 75
Default sanwa super exzes manual

Anyone a manual for my transmitter? Throttle-sensor might be broken...

My full throttle comes in to early (3/4 off the stick). Also gently starting is fairly impossible. So 2 options here:
1. potential meter of the throttle is dead
2. somewhere in the settings of the transmittor there might be a way to adjust the flow of the throttle....?

Anyone?

thanks

Simon
Reply With Quote
  #2  
Old 30-07-2008
Chequered Flag Racing's Avatar
Chequered Flag Racing Chequered Flag Racing is offline
Spends too long on oOple ...
 
Join Date: Feb 2007
Location: In Early Retirment
Posts: 5,987
Default

can't help with query but,

you can get a manual for £2.50 here
__________________
o0ple Trader Feedback
NE Venue's New & Old
my space on YouTube
CFR RCTV Channel
Glenn Atterton

BRCA 2005 1/10th Off-Road Veterans Champion
LMP12 National Champion 2003/2004 / F3 class
Reply With Quote
  #3  
Old 30-07-2008
dave g's Avatar
dave g dave g is offline
Mad Member
 
Join Date: Nov 2005
Location: wakefield west yorkshire
Posts: 1,393
Send a message via MSN to dave g
Default

select the memory,move across to m-clear and press both the inc+ and inc- buttons at the same time,this will set that memory slot back to default settings.

if its the epa that needs adjusting then goto epa th,push forward on stick and use the inc+/- to adjust the forward throw..pullback on stick to do same for brakes.
Reply With Quote
  #4  
Old 01-08-2008
Red-Bull-Racing's Avatar
Red-Bull-Racing Red-Bull-Racing is offline
Member
 
Join Date: May 2007
Posts: 75
Default

Thanks for the tips dave g, I did the m-clear but then the problem was worse
I borrowed a ko esprit 2 from a friend, and now I can drive smooth lines.
So problem solved , have to get another transmitter.

Thanks
Simon
Reply With Quote
  #5  
Old 01-08-2008
dave g's Avatar
dave g dave g is offline
Mad Member
 
Join Date: Nov 2005
Location: wakefield west yorkshire
Posts: 1,393
Send a message via MSN to dave g
Default

so whats happeing is that if you set the speedo up,your hitting full throttle before the stick reaches its full travel yes?

im guessing that the pot inside the radio has worked loose and its twisted round a few degrees so the pot is reaching its end point before the stick is..you can open the radio up and check the screw that locks the pot onto the stick movement is tight,if it has moved then its just a case of twisting it back round 1-2 degrees,connect your speedo up without motor and push stick fully forward,keep the stick jammed forward while you turn the loosened pot in its housing,watch for the high throttle light on the speedo and set it so it comes on at the right point.

dave
Reply With Quote
  #6  
Old 01-08-2008
alrg500's Avatar
alrg500 alrg500 is offline
Member
 
Join Date: Sep 2006
Posts: 109
Default

Just had mine repaired with a similar problem, only mine had nothing forward but worked fine backwards. just needed a new pot.

If you have a multimeter measure the pot resistance and it should slowly increase/decrease in resistance as you move the stick. if there is a sudden step than thats your fault.
__________________
Atomic Carbon S2, Atomised B44, Tek18, Blaze, Mid motor Mini T
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:16 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com