|
#1
|
||||
|
||||
sparrowhalk xt brushless chassis
as above brought a thunder tiger xt, then added 5800kv dynamite fuse, ezrun esc, power hd dig servo... made this chassis & lipo holder up as didn't like the general layout and this one allows me to use 4000 11.v fightmax's
before: after: click to enlarge
__________________
Rc18t madrat
|
#2
|
||||
|
||||
5800Kv on 3s? No way... That's more than 70,000 rpm unloaded on a full pack. Your motor WILL explode.
p.s. It's Flightmax Jon |
#3
|
||||
|
||||
64380... gets hot but not hot enuff too touch... on its limits tho
__________________
Rc18t madrat
|
#4
|
||||
|
||||
4.2v per cell fully charged. Or 12.6v. 12.6x5800=73,080 rpm.
|
#5
|
||||
|
||||
fair enuff... runs fine tho
__________________
Rc18t madrat
|
#6
|
||||
|
||||
Huh....
Well, I guess just don't expect it to last that long. Make sure you lubricate your (motor) bearings frequently. |
#7
|
||||
|
||||
it doesn't even got too hot too touch... and ok cheers for the tip
__________________
Rc18t madrat
|
#8
|
||||
|
||||
http://www.rcpitstop.co.uk/dynamite-...3736-202-p.asp
even on the specs its says it can handle 2/3 cell lipo
__________________
Rc18t madrat
|
|
|