|
#1
|
|||
|
|||
Sanwa Gemini Battery problem..
I've just bought a brand new Sanwa Gemini II transmitter howver the battery seems to die VERY quickly.. from what I have experienced so far in practise I just cannot see the transmitter lasting for a whole meeting.
Is this normal and do most people have two fully charged transmitter batteries or do you think there is a fault in the transmitter battery? Thanks in advance! |
#2
|
||||
|
||||
i would say its not charging fully or not holding a charge well enough.
i use an 1800mah pack in mine(super exzes) and it would do a 2 day national easy. dave |
#3
|
|||
|
|||
Well I'm charging it for ages and it seems to die out after 15 minutes useage...
Should I presume there is a fault? |
#4
|
||||
|
||||
Charge ours overnight, one cable from the adapter is for the transmitter battery, other for reciever packs (think) but lower charge rate, we have under charged on this cable before.....
Have seen replacements, heres one: http://www.stormforceracing.co.uk/prods_assembled.htm see bottom of page comeon guys.......how do i add those nice square smilies? |
#5
|
|||
|
|||
Thanks, I've tried to charge it with the battery both in and out of the transmitter to see different results.. but its the same.
I'm not really interested in replacements as this set is brand new! |
#6
|
||||
|
||||
well then you would be better talking to whoever you bought it from then for a replacement..
dave |
#7
|
||||
|
||||
Just ordered a Sanwa battery pack from Stormforce Racing.
Original Battery pack would not last for a 2 day meeting.
__________________
Associated SC10. Associated RC8. Atomic Carbon S4. Paint by Wezzer. |
#8
|
||||
|
||||
As a note, from the charger, cable with connector for transmitter 9.6volt charges with battery in the transmitter, cable with blue female connector 4.8volts for reciever batteries.
We have made a patch lead so we can charge off the charger we use for car cells, useful when in need of topping up when racing, keep the original pack always handy as backup. |
#9
|
||||
|
||||
Had mine for nearly two years now and never had a problem even at two day nationals.
|
#10
|
|||
|
|||
Could anyone show me a diagram or something as to how I would assemble a 9.6v tx pack as I have some 2400nimhs which I wouldnt mind using in my Gemini.
Also, what would you recommend I charge the current Nicd pack at on a pulsar? e.g. cutoff and amp rate |
#11
|
||||
|
||||
I have the upgraded battery from stormforce and it lasts me ages i hardly ever charge it and i use it every week.
A |
#12
|
|||
|
|||
Strobe, order received. now in process!
JCJC, thanks for the plug... so i will tell you how to do the ... just type colon and close curved bracket and it does it for you... Neil |
#13
|
||||
|
||||
ooooho....we are playing now.......thanks neil
ooooho!!! no stopping me now !!!!!!! Last edited by JCJC; 03-01-2007 at 09:25 PM. |
#14
|
||||
|
||||
Sorry, not precise numbers, if we are racing and it looks a little low we tend to wack it on about 1 Amp for half an hour between races, just topup realy.
|
#15
|
||||
|
||||
Neil Oliver.
Battery arrived first thing this morning. Pleasure to do business with. Many Thanks Mark
__________________
Associated SC10. Associated RC8. Atomic Carbon S4. Paint by Wezzer. |
#16
|
|||
|
|||
Your welcome. Let me know how long it runs until you need to charge it! Do you know your also the first mortal to see the revised StormforceRacing logo that Jimmy did for me.!? It is not on the website yet, i am working on a new site with better layout.
Regards Neil |
#17
|
||||
|
||||
No Problems Neil.
Will more than likely see you at some Mid-West Regionals this year.
__________________
Associated SC10. Associated RC8. Atomic Carbon S4. Paint by Wezzer. |
#18
|
||||
|
||||
Quote:
Thanks! |
#19
|
||||
|
||||
I chargemine off the wall adaptor that came with it i supose its ok it always charges mine.
A |
#20
|
|||
|
|||
You are OK using the standard transmitter charger. This will be designed to charge the NiCd pack so the higher capacity NiMH pack will just take longer to charge.
Neil |
|
|