AERO 1

[Northy]

3.142 would be better

G

[Lee]

Its hard to be so accurate with a dremel though

[Richard Lowe]

Looking at the front end setup (camberlinks and springs) that will steer like a mofo

[Northy]

Originally Posted by Richard Lowe

Looking at the front end setup (camberlinks and springs) that will steer like a mofo

I see what you mean Rich

[KevLee]

Originally Posted by Richard Lowe

Looking at the front end setup (camberlinks and springs) that will steer like a mofo

That isn't a losi orange spring on there though.... if thats what you mean

[Cockerill]

Originally Posted by KevLee

That isn't a losi orange spring on there though.... if thats what you mean

Could they not have picked a nicer colour

[stegger]

LEE, look were garcia has his PT but he isn't using a powercap

[bigred5765]

Originally Posted by Richard Lowe

Looking at the front end setup (camberlinks and springs) that will steer like a mofo

hey rich how do you steer a mofo lol
hard and fast

[Lee]

They aint losi springs up front

Edit:Missed kevs post lol

[Lee]

Originally Posted by Cockerill

Could they not have picked a nicer colour

Yeah they should have been beige like the X5 gear covers

[DaveG28]

Hi Lee, do you have the dimensions of your rx anywhere, and how much spare space it leaves in each direction in the car (including height!), I'm trying to work out if I'll get my futaba R603FS in it, or if I'll have to swap to spectrum to use a micro one or something?

[Richard Lowe]

Originally Posted by Lee

Yeah they should have been beige like the X5 gear covers

1 - 1

The camberlinks look like it will hook a lot mid corner looking the length of them compared to the wishbone

[bigred5765]

Originally Posted by DaveG28

Hi Lee, do you have the dimensions of your rx anywhere, and how much spare space it leaves in each direction in the car (including height!), I'm trying to work out if I'll get my futaba R603FS in it, or if I'll have to swap to spectrum to use a micro one or something?

im sure lee
will spend 2-3 hrs measuring it for you
he is such a nice man

[RogerM]

Doesn't look too bad to me ..... similar to how I have the links on the ZX5-SP and on my previous three 4wd cars (excluding the BJ4WE) .....

[Northy]

Sorry - Lee is currently unavailable. He is currently worrying to death about if he needs to run drilled or standard Losi pistons in his new ride.......

........please leave you question after the beep.




















BEEP

[bigred5765]

random bod

[DaveG28]

Originally Posted by bigred5765

im sure lee
will spend 2-3 hrs measuring it for you
he is such a nice man

Or it could be written on the box, like futaba ones are...

With setups, are the team drivers running standard rear toe in, or customizing it to each persons preference using dremels etc?

[elvo]

Originally Posted by Richard Lowe

Looking at the front end setup (camberlinks and springs) that will steer like a mofo

Yes! A bad mofo!
(Mind you, the aero I drove did steer like a mofo - not necessarily bad)

On a totally unrelated car the front camber links seem to be mounted not on the kingpin, but on that other hole in the castor block: http://gallerie.automodelisme.com/di...bum=137&pos=37 Seems more reasonable, doesn't it?

[Northy]

Originally Posted by DaveG28

With setups, are the team drivers running standard rear toe in, or customizing it to each persons preference using dremels etc?

Or just adding 'SOME'

G

[Richard Lowe]

Originally Posted by elvo

Yes! A bad mofo!
(Mind you, the aero I drove did steer like a mofo - not necessarily bad)

On a totally unrelated car the front camber links seem to be mounted not on the kingpin, but on that other hole in the castor block: http://gallerie.automodelisme.com/di...bum=137&pos=37 Seems more reasonable, doesn't it?

Yep that looks much more sensible