|
#1
|
||||
|
||||
Supastox Mi5 Mod
Hi,
I'm finally getting the hang of racing, and looking to improve my car. I'm gonna buy things like the alloy screw set and purple alloy nuts, but came across the 'mod' on the web. Firstly, is it worth it, does it drastically improve performance? And secondly, is it a hard mod to do, or a part that goes straight in? (Pictures of the mod could help) Thanks in advance for all the help, Sam |
#2
|
||||
|
||||
Firstly yes it's worth doing as makes the front end more consistent and secondly yes it's easy to do and they fit straight in, all you do is take the rubber grommets out of the front suspension beam and glue in the mi5 pivot balls, there are step by step instructions and pics on the gt12 Facebook page
__________________
Schumacher kf Schumacher sv2 Durango Dex210 Carisma gtb x2 Schumacher gt12 x2 |
#3
|
||||
|
||||
Thanks a lot!
|
#4
|
||||
|
||||
Gt12 circuit UK is the one to go on, its in the files section,if you buy the front wheel base kit the new lower beam comes pre done
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#5
|
||||
|
||||
Mi5 Mod
I'm gonna be trying this on my Supastox, from what I've read and heard it transforms the car. Have you got the part number for the front wheel base kit?
|
#6
|
||||
|
||||
|
#7
|
||||
|
||||
Mi5 Mod
That's just the wishbone balls and sockets, not the pre done wheelbase kit. I'll probably just get the balls £4 for 4 doesn't seem too bad.
|
#8
|
||||
|
||||
U4523 and we'll worth the £15 two plates bolts and spanner Inc
6 in stock at mbmodels www.rccarshop.co.UK
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#9
|
||||
|
||||
Mi5 Mod
Surely this would change the wheelbase though, meaning the bodies would not fit?
Last edited by SamJones; 23-07-2014 at 08:35 AM. Reason: Mistake. |
#10
|
||||
|
||||
Ah, my fault I thought you meant these, must of read wrong
|
#11
|
||||
|
||||
Not wanting to point out the obvious, but yup that's what happens when you fit a wheel base adjusting kit, it adjusts wheel base.... on any car with a full body shell you will need to adjust the body arches.. How ever by simply enlarging the front of the wheel arch with a dremel sanding drum, it works OK.
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
|
|