|
#1
|
|||
|
|||
Associated small bore pistons help
Hi all, need some help here on this one. I have decided to use a rc10b4.2 for a rear motor class car at our local club. I used to use a rc10b4 years ago and had a great setup which I believe was widely used indoors on carpet at the time. Part of this setup was 30wt oil with piston number 1 in the rear shocks and 35wt oil and piston number 2 in the front shocks on the kit small bore shocks. As the b4.2 generation of this car has big bore shocks on it I want to do my best to get the same damping level I had with the rc10b4. Does anybody know what size hole was used in the small bore associated pistons 1,2,3 so I can replicate this in the big bore shocks. Any help would be appreciated.
|
#2
|
||||
|
||||
Hi,
Some information here: http://www.oople.com/forums/showthread.php?t=9030 and http://www.oople.com/forums/showthread.php?t=17821 MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
#3
|
|||
|
|||
Nice one , thanks.
|
Thread Tools | |
Display Modes | |
|
|