tc4 asc 1401 turnbuckles help

[pizzaman]

can anyone tell me if these will fit on the rear x6 squared rather than after cut the standard b4 ones

Thanks in advance

[YoungChazz]

I believe the standard B4 turnbuckles fit, unless you have the E-Speed hangers, which require shorter t-bucs.

[Body Paint]

can anyone tell me if these will fit on the rear x6 squared rather than after cut the standard b4 ones

Thanks in advance

Chazz is corrct. If you have a stock X6^2 you can use normal B4 turnbuckles. If you have the E speed hangers you need shorter ones, if you use the long Losi ball cups you can get away with 1"1/4 (32mm) turnbuckles. If you use the B4 ball cups you need a slightly longer turnbuckle, 1"1/2 (38mm) is the smallest you will get away with.

The TC4 has 3 different length t bucs, the longest of which is 1.3" (33mm)