tc4 asc 1401 turnbuckles help

[pizzaman]

can anyone tell me if these will fit on the rear x6 squared rather than after cut the standard b4 ones

Thanks in advance

[YoungChazz]

I believe the standard B4 turnbuckles fit, unless you have the E-Speed hangers, which require shorter t-bucs.

[Body Paint]

Originally Posted by pizzaman

can anyone tell me if these will fit on the rear x6 squared rather than after cut the standard b4 ones

Thanks in advance

Chazz is corrct. If you have a stock X6^2 you can use normal B4 turnbuckles. If you have the E speed hangers you need shorter ones, if you use the long Losi ball cups you can get away with 1"1/4 (32mm) turnbuckles. If you use the B4 ball cups you need a slightly longer turnbuckle, 1"1/2 (38mm) is the smallest you will get away with.

The TC4 has 3 different length t bucs, the longest of which is 1.3" (33mm)