View Full Version : Brushless Broke?
antnee
17-11-2007, 09:58 PM
Got a strange problem with my brushless,
I'm running a Mamba Max esc with a Orion Vortex 6.5,
It had been working fine untill the last round on friday, it just went slow and stopped. We took it apart and thought it was cos it wasnt shimmed right, sorted the shims out and its the same
It turns over a VERY low throttle then just stutters, and the wires get hot too :(
Idea's anyone?
antnee
19-11-2007, 04:22 PM
anyone?
Wraggy
19-11-2007, 04:31 PM
sounds like your speedo has thermalled out ???
antnee
19-11-2007, 04:34 PM
Thermalled out as in non-reversable damage?
Still didn't work when I tried it yesterday.
Chrislong
19-11-2007, 04:37 PM
Do you have access to another motor? It could be something has come a-drift internally and something is shorting out (have a look, especially the sensor wire area), but only by testing the ESC with a different motor would tell if it is the ESC or motor at fault.
Wraggy
19-11-2007, 04:38 PM
Thermalled out as in non-reversable damage?
Still didn't work when I tried it yesterday.
yeah this seems to happen to some of the LRP ones (ive had one do that anyway and know of another that has done the same )
so may be the case with Mamba ones ??
do you get a warranty with them ??
if so i would try them 1st ..??
antnee
19-11-2007, 05:15 PM
bought motor and esc second hand :(
RogerM
19-11-2007, 05:23 PM
[quote=Wraggy;71737]yeah this seems to happen to some of the LRP ones (ive had one do that anyway and know of another that has done the same )
quote]
How the hell did you do manage that?? Indoors, 5.5, over geared (well over the recomended ratio by 2 teeth) and run till the 4200s nearly dumped in practice and still, 18 flashes (5 is thermal failure region!!)
:o
Wraggy
20-11-2007, 08:34 AM
[quote=Wraggy;71737]yeah this seems to happen to some of the LRP ones (ive had one do that anyway and know of another that has done the same )
quote]
How the hell did you do manage that?? Indoors, 5.5, over geared (well over the recomended ratio by 2 teeth) and run till the 4200s nearly dumped in practice and still, 18 flashes (5 is thermal failure region!!)
:o
it may of been down to a fault with the speedo in the 1st place as since then ive ran the same gearing and everything else and its no wjere near thermalling ..
antnee
22-11-2007, 05:18 PM
Do orion have a UK base/repairers?
SimonW
24-11-2007, 07:52 PM
My GTB has just squeaked and popped with a puff of smoke when i switched it on..... Wierd.
josh_smaxx
24-11-2007, 10:14 PM
If its the speedo, just send it to castle for repair, there great with customer service, even if it takes a while :)
antnee
25-11-2007, 12:23 AM
i think its the motor as the esc runs brushed motors still
josh_smaxx
25-11-2007, 04:15 PM
Ye but brushed motors dont need a sensor wire ;) i had the same problem and ended up havign to sheel out for a GTB :( but mine was just stuttering, it did sort of work.
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.