fit a Lipo into a mad rat

[deano261]

I have a lipo and the lipo i just bought is somewhat too tight and a little to high for the battery tray holder is there a way to hold it down

[Robbiejuk]

Put some washers under the battery posts. Fit some longer screws. Obviously you will have to clamp the posts with a pair of pliers when you tighten the screws up but it should raise the battery holder up to fit the battery in. :thumbsup:

[damselfly]

Velcro also comes in very handy for an application like this.:thumbsup:

[deano261]

Thats brilliant I have plenty of velcro

[Cameo]

Put some washers under the battery posts. Fit some longer screws. Obviously you will have to clamp the posts with a pair of pliers when you tighten the screws up but it should raise the battery holder up to fit the battery in. :thumbsup:

+1 :thumbsup: this is better than velcro, that can still come apart in a big crash and if connectors make contact with something they shouldn't "Expensive repair bill" :thumbdown: