PDA

View Full Version : Cougar gearbox mystery


matto
25-06-2011, 02:01 PM
Having not raced since 1995 I am very happy to find this site for reference information. My first post aims to solve my Cougar gearbox mystery.

I have Cougar 1 but the diff looks to be Cougar 2 team or racing, it is fully ballraced, has plain washers instead of lobed ones, there is no evidence of friction paper, the washer carriers are alloy and the pulley flanges push on instead of screwing in.

Can anyone confirm what type of diff this is?

Lastly and most importantly does anyone know where I can find a new diff pulley & drive belt? The pulley has three or four cracks in it and the belt looks just about shot.

Many thanks, Matt.

Moozo
25-06-2011, 05:06 PM
Hi Matt and welcome

Sounds like your diff is from a later model cougar, pics would help us to identify and confirm this i might be able to help you with the parts you need again pics would help, or part numbers:thumbsup:

thanks Mick

Body Paint
25-06-2011, 07:49 PM
You may still get parts from Schumacher, I think they still use a variation of that box on a nitro truck. Check their website it lists parts they carry for all the older cars aswell.

Diff sounds like the one out of the cougar 95 ??

Moozo
26-06-2011, 06:09 AM
Diff sounds like the one out of the cougar 95 ??

Not if its got a drive belt!!!
cougar 2000/95 and fireblade all ran a geared transmission, oh and the cougar club 10!!

Mick

matto
26-06-2011, 07:06 PM
Thanks for the replies so far. I've searched the Schumacher webiste under vintage cars but have had no joy. Here are some pics that may help. Matt.

brian s
26-06-2011, 08:20 PM
looks like a bosscat front pro diff, how many teeth on the pulley (pro diff had 51 teeth)

matto
28-06-2011, 11:28 AM
A contact at Tamiyaclub thinks that my diff is pro diff from a Cougar 2.....mystery over, perhaps?

Can anyone help provide a contact for a new diff pulley, end caps and drive belt.......failing that a geared gearbox from a late club 10.

kaszal
28-06-2011, 08:29 PM
Is this any good for you?

U195G HI TORQUE DRIVE BELTS 2WD 8MM

Saw it here...

http://forum.petitrc.com/_forumphp/showthread.php?t=52330&page=2

Dazzler
28-06-2011, 09:45 PM
Look at the second page of this post I started, user Gainsy on here posted a similar diff and was looking to sell.

http://www.oople.com/forums/showthread.php?t=71182

Diff and belt, looked better condition than yours, and was taken from a Cougar.

Hope that helps.

gainsy
29-06-2011, 07:31 AM
Sorry guys, all my schumacher stuff is sold now

matto
29-06-2011, 06:22 PM
Gents, thanks for the info. It is 51 tooth pulley T1171 & belt T195 that I need. Now we've solved the mystery I'll post a new message with these in the title. Matt.

brian s
06-07-2011, 11:33 AM
hi matt, i have an MMS cougar diff (new but have lost the balls for it) and a layshaft with 90t spur which have been used,but are in excellent condition (see photo). p`m me if your interested

http://i466.photobucket.com/albums/rr24/brianspooner/DSCF0923.jpg

ScottyDogWoof
18-07-2011, 12:01 AM
The club 10 had the belt transmission guys, i had one. Just recently i changed it for the Big 6 stacked gear block instead, much better for brushless power :)

QuackingPlums
18-07-2011, 09:00 AM
The club 10 had the belt transmission guys, i had one. Just recently i changed it for the Big 6 stacked gear block instead, much better for brushless power :)

The early Club 10 had the belt-drive Cougar transmission. The later one (maybe after the Big6 was released?) had gear drive - mine has the gearbox.

imull
18-07-2011, 12:36 PM
I've got a new in packet belt if you're interested?

Ian

imull
18-07-2011, 07:36 PM
http://i73.photobucket.com/albums/i220/imull2001/Oople/2011-07-18201657.jpg

If you're interested PM me. I also have a new WASP belt, just not in the packet.

Ian