oOple.com Forums - DX3R / S

oOple.com Forums (http://www.oople.com/forums/index.php)

- Electrics (http://www.oople.com/forums/forumdisplay.php?f=26)

- - DX3R / S (http://www.oople.com/forums/showthread.php?t=22803)

do these transmitters suffer from the thumbwheel adjuster breaking the small pin of the wheel?

http://img3012.photobox.co.uk/871873...773e3a5f08.jpg

Done a repair with super glue and it's working so far

When I placed the roller in the adjuster pot the other end was miles away from the micro switch. Re-soldered the pot to reduce the angle the roller has to be pressed. Now it's almost touching and the roller doesn't need to be pressed as far so reducing the stress on the small pin of the roller.
For the time being I'm pressing the left side of the roller nearer to the micro switch.

http://www.maxbashing.com/forum/images/icons/icon13.gif Bad design if you ask me, asking the small pin to do two duties http://www.maxbashing.com/forum/images/icons/icon13.gif

going to see what Horizon Hobby UK and Spektrum say

Me and Rich D, had problems (Rich D Broke it :( :thumbsup:

Just replaced it at local modelshop and it was my christmas present:mad::mad:

:P

Quote:

Originally Posted by MChandler (Post 232568)

Me and Rich D, had problems (Rich D Broke it :( :thumbsup:

Just replaced it at local modelshop and it was my christmas present:mad::mad:

:P

Yes i confess i broke it with the very first push of the button - pretty dire build quality tbh

Sorry Matty :woot:

Or Someone, With American Thumbs:cry: :thumbsup::thumbsup: