XX4 Rear Kickup (Antisquat?)
 

Not over familiar with the XX4 still. Can you tell me if it runs any rear 'kickup' (antisquat:confused:) i.e. - do the rear wishbone inner pivot pins run horizontal, or are they at an angle?

Thanks in advance guys :)

On the UK tracks, it was generally at 2 degrees. On low grip bumpy tracks you could run the optional 0 degrees anti-squat.

HTH
Mark

There are two options a 0 deg block and a 2 deg block, it is moulded into the block so you can tell.

Personally I run the 0 deg block and washer up the front if/as needed for some antisquat.

Thanks guys, as always. :thumbsup: