|
|||||||||||||||
|
#1
|
|||
|
|||
|
Not over familiar with the XX4 still. Can you tell me if it runs any rear 'kickup' (antisquat
) i.e. - do the rear wishbone inner pivot pins run horizontal, or are they at an angle?Thanks in advance guys
|
|
#2
|
||||
|
||||
|
On the UK tracks, it was generally at 2 degrees. On low grip bumpy tracks you could run the optional 0 degrees anti-squat.
HTH Mark
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx :: :: Paint By Turnip Paint :: |
|
#3
|
||||
|
||||
|
There are two options a 0 deg block and a 2 deg block, it is moulded into the block so you can tell.
Personally I run the 0 deg block and washer up the front if/as needed for some antisquat.
__________________
Nortech is ACE! |
|
#4
|
|||
|
|||
|
Thanks guys, as always.
|
![]() |
|
|