|
|
#1
|
||||
|
||||
RC10 stealth think B2
After 20 years sitting on the shelf i thought i would give it a go. Put my LRP SXX speedo in and lipo's out of my starter box and borrowed a 5.5 motor super glued the side walls of the tyres cos they were perished
and took it out for a race and it was awesome so i'm now thinking about racing it more but need wheels and a body who stocks the OLD school stuff It's black ali tub stealth version |
#2
|
||||
|
||||
|
#3
|
||||
|
||||
trackside spares managed to get some wheels and shells fairly recently, might be worth trying to see if he can get more?
|
#4
|
||||
|
||||
If its the alloy tub its not a B2 (thats a plastic car) its a Team car.
The picture below is mine, running at Bury with a Team Wave RBS and Novak 10.5t. I've tried hotter motors but the slipper didn't like them - if you are running a 5.5t I'd recommend fitting the slipper from a B4 to be on the safe side. It fits straight on as most of the gearbox is the same. The shell and wheels both came from ebay, where there are several places doing shells. The wheels are from JC's web shop and come in a set with the fronts too. I'm doing better with mine than I was with a B4.... Ironically Braxteds predecessor (Springfield) is where I used to race my first RC10, back around 1990!
__________________
Yz4 - Yz2 DEX210 - Cobra 4210- DEX410 RC10 Team - Manta Ray - RC10T Mini Trophy - Blizzard - Wheely King Tz4 - GT24B BMRCC Emergency back-up race controller (but only if nobody better is available) |
#5
|
||||
|
||||
looking good over shooting a couple of corners but hey it was an long track..
mvh isobarik |
#6
|
||||
|
||||
Some pics
|
#7
|
||||
|
||||
Quote:
I used to race there as well Keith Wright still runs it. Do you remember Kristian Gibbs and Graham Kisby as they still race there |
#8
|
||||
|
||||
Are these what i need
Front http://www.amainhobbies.com/product_...Wheel-Yellow-4 Rear http://www.amainhobbies.com/product_...Wheel-Yellow-4 |
|
|